Top Industrial Automation and Electrical Instrument from HKXYTECH
  • Dust Monitor DT450G

    Dust Monitor DT450G

    Air pollution control systems such as bag filters and electrostatic precipitators are used to separate particulate or dust from the gas stream before it is exhausted into the atmosphere. To maintain the dust concentration of the emission gas below the specified level through effective operation of the control system, i...

  • Gas Density/Hydrogen Purity Analyzer GD40 Detector

    Gas Density/Hydrogen Purity Analyzer GD40 Detector

    Low Installation Cost Virtually Maintenance Free Not affected by Dust or Oil Mist

  • Gas Density/Hydrogen Purity Analyzer GD402 Analyzer

    Gas Density/Hydrogen Purity Analyzer GD402 Analyzer

    Proven Design Many detector features Simple, user-friendly interface Low installation cost

  • Non-Dispersive Infrared Gas Analyzers (NDIR) IR400

    Non-Dispersive Infrared Gas Analyzers (NDIR) IR400

    The IR400 infrared gas analyzer is capable of measuring the concentrations of NO, SO2, CO2, CO, CH4 and O2 components in sample gas. NO, SO2, CO2, CO and CH4 are measured by the non-dispersive infrared method (NDIR), while O2 is measured by built-in paramagnetic sensor or external zirconia sensor. A maximum of 5 compon...

  • Non-Dispersive Infrared Gas Analyzers (NDIR) IR200

    Non-Dispersive Infrared Gas Analyzers (NDIR) IR200

    The IR200 infrared gas analyzer is capable of measuring the concentrations of CO2, CO, CH4, SO2, NO and O2 components in sample gas. CO2, CO, CH4, SO2 and NO are measured by the non-dispersive infrared method (NDIR), while O2 is measured by the paramagnetic or zirconia method. A maximum of 4 components including O2 (up...

  • Non-Dispersive Infrared Gas Analyzers (NDIR) IR100

    Non-Dispersive Infrared Gas Analyzers (NDIR) IR100

    The IR100TA and IR100A, dedicated for analysis of either CO2, CO, or CH4, the IR100TB and the IR100B, dedicated for simultaneous analysis of CO2 and CO, are available. The analyzers are easy to maintain and works steadily over long periods. The ideal application of these analyzers are continuous measurement for the ...

  • Low Concentration (ppm) Zirconia Oxygen Analyzer OX400

    Low Concentration (ppm) Zirconia Oxygen Analyzer OX400

    This is the latest oxygen analyzer from Yokogawa, and its development was based on the company's long experience and strong track record with this technology. A proprietary new thin-film deposition technology was used in the zirconia sensor that creates a molecular bond between the zirconia element and the platinum ...

  • OX102

    OX102

    The OX102 Oxygen Analyzer measures oxygen concentration from ppm to percent levels in a single analyzer and is ideal for ppm-level measurements in applications such as nitrogen reflow furnaces and semiconductor plants. The zirconia oxygen sensor uses a method that is based on the limiting current principle and is co...

  • MG8G

    MG8G

    The MG8G paramagnetic oxygen analyzer measures the concentration of oxygen based on the fact that a magnet attracts gaseous oxygen. Whereas zirconia oxygen analyzers cannot measure oxygen in flammable gas mixtures, the MG8G can measure oxygen concentration in flammable gas mixtures. With an appropriate sampling syst...

  • ABB S800 Redundant FCI CI820V1/CI820

    ABB S800 Redundant FCI CI820V1/CI820

    Advant Fieldbus 100 FCI for redundancy configuration. Advant Fieldbus 100 modem for twisted pair cable. Power supply 24 V (19.2-30 V), Rated insulation voltage 50 V.