ABB inverter/ Yokogawa DCS / Emerson 475 communicator
  • Honeywell SPXCDXSRXSS CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL)

    Honeywell SPXCDXSRXSS CH4(Methane) IR 0-100%LEL (20,0 t...

    ACCESSORIES, CONSUMABLES & SPARES

    The Sensepoint XCD (exceed) range of fixed gas detectors is used to monitor areas where flammable, oxygen deficiency and toxic gases may pose a hazard to working environments. This advanced and versatile range of gas detectors monitors and indicates the presence of any one of a selection of toxic and flammable gases. A...

  • Honeywell SPXCDASMTX4 ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter, 2 x M20 Entries, 1 x M25 Entry, painted 316SS

    Honeywell SPXCDASMTX4 ATEX, IECEx & AP approved SP ...

    KIT includes Transmitter, Magnetic Wand and Allen Key

    Sensepoint XCD-RTD transmitter (use with oxygen and toxic Sensepoint sensors) Sensepoint XCD-RTD (Remote Toxic Detector) allows for a gas sensor from a wider selection of 2-wire 4 to 20 mA input type Toxic and Oxygen sensors to be fitted directly to the transmitter housing, or wired remotely from another location.

  • BW Technologies by Honeywell Multi-Gas Detector GasAlertMicroClip XT

    BW Technologies by Honeywell Multi-Gas Detector GasAler...

    Continuous LCD shows real-time gas concentrations Compact and lightweight design makes it comfortable to wear Water-resistant Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up Bright wide-angled visual alarm bars Built-in concussion-proof boot

    The slim and compact GasAlertMicroClip XT provides affordable protection from atmospheric hazards. With continuous visual confirmation of detector operation and compliance provided by the IntelliFlash? feature. Simple one-button operation for the ultimate ease of use significantly reduces training times. The GasAlertMi...

  • BW Technologies by Honeywell GasAlertMax XT II Multi-Gas Detectors

    BW Technologies by Honeywell GasAlertMax XT II Multi-Ga...

    100% New and Original In ready stock

    Monitors H2S, CO, O2 and combustibles One-button operation with robust, motorized pump Compatible with MicroDock II

  •   EJA110A-DMH5A-92NN Yokgoawa differential pressure transmitter

    EJA110A-DMH5A-92NN Yokgoawa differential pressure tra...

    The high performance differential pressure transmitter model EJA110A can be used to measure liquid, gas, or steam flow as well as liquid level, density and pressure. It outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Model EJA110A also features remote setup and monitoring thro...

  • YOKOGAWA  ESD Analog Input Module SAI143-S53

    YOKOGAWA ESD Analog Input Module SAI143-S53

    YOKOGAWA ESD SAI143-S53 Place of Origin: Singapore,Yokogawa original packing, by carton

    YOKOGAWA ESD SAI143-S53 This GS describes the hardware specifications of the analog I/O modules that can be mounted on the safety node unit and the safety control unit.

  • Yokogawa Digital Input Module ADV151

    Yokogawa Digital Input Module ADV151

    EXW China term; Origin: Indonesia;

    Yokogawa Digital Input Module ADV151 Digital I/O Modules (FIO) that can be installed in the Node Unit for ESB Bus (ANB10S, ANB10D, ANB11S, ANB11D), the Node Unit for ER Bus (ANR10S, ANR10D) and the Field Control Unit (AFV30S, AFV30D, AFV40S, AFV40D, AFF50S, AFF50D, AFV10S, AFV10D).

  • YOKOGAWA Analog Input Module AAI141

    YOKOGAWA Analog Input Module AAI141

    EXW China Term; Coutry of Origin: Indonesia;

    YOKOGAWA Analog Input Module AAI141 Current/Voltage Input Modules (Non-Isolated) These modules provide 16 inputs of mainly 4 to 20 mA DC or 1 to 5 V DC standardized signals from 2-wire/4-wire transmitters. They can be used in dual-redundant configuration.

  • Yokogawa  Digital Output Module ADV551

    Yokogawa Digital Output Module ADV551

    EXW China term; Origin: Indonesia;

    Yokogawa Digital Output Module ADV551 Digital I/O Modules (FIO) that can be installed in the Node Unit for ESB Bus (ANB10S, ANB10D, ANB11S, ANB11D), the Node Unit for ER Bus (ANR10S, ANR10D) and the Field Control Unit (AFV30S, AFV30D, AFV40S, AFV40D, AFF50S, AFF50D, AFV10S, AFV10D).

  • Yokogawa Analog I/O Module AAB841

    Yokogawa Analog I/O Module AAB841

    EXW CHINA TERM; COUTRY OF ORIGIN: INDONESIA;

    Yokogawa Analog I/O Module AAB841-S00 These modules provide 16 inputs of mainly 4 to 20 mA DC or 1 to 5 V DC standardized signals from 2-wire/4-wire transmitters. They can be used in dual-redundant configuration.