IC693ACC300M IC693ACC300N IC693ACC300O

The Input Simulator module does not require any field wiring - just set the mode switch on the back of the module to 8 or 16 and install the module in the selected I/O slot in a baseplate. An illustration of the module is shown in the following figure.

FANUC PLC series 90-30

IC693ACC300 Input Simulator Module
IC693ACC300LT Input Simulator Module (LT)
IC693ACC301 Replacement Battery, CPU & PCM (qty 2)
IC693ACC302 High capacity battery pack. The new Auxiliary Battery Pack (IC693ACC302) will enable Series 90-30 & Series 90-70 CPUs (except CPU374) to go up to 75                 months (shelf life of 10 years ) of RAM memory backup w/no power & the CPU374 backup=15 mo
IC693ACC303 Memory Card, 32 KBytes, Use With HHP (qty 1)
IC693ACC305 EEPROM Chips (qty 4)
IC693ACC306 EPROM Chips (qty 4)
IC693ACC307 I/O Bus Terminator Plug
IC693ACC308 Rack Adaptor Bracket, Series 90-30 10 Slot to 19" (Front Mount)
IC693ACC309 Rack Adaptor Bracket, Series One 5 and 10 Slot Racks
IC693ACC310 Filler Module, Blank Slot
IC693ACC311 Terminal Blocks (qty 6)
IC693ACC315 Battery Adapter Kit (battery not included) for CPU31* and CPU32*
IC693ACC316 Connector Kit, 24 Pin, Qty (10), Solder Eyelet (For MDL654, 655, 752, 753)
IC693ACC317 Connector Kit, 24 Pin, Qty (10), Crimp Type (For MDL654, 655, 752, 753)
IC693ACC318 Connector Kit, 24 Pin, Qty (10), Ribbon Type (For MDL654, 655, 752, 753)
IC693ACC319 Spare Parts Kit (I/O, CPU, PCM)
IC693ACC320 Spare Parts Kit (Power Supply)
IC693ACC328 Utility Update Software
IC693ACC329 TBQC Base for IC693MDL645, IC693MDL646, and IC693MDL240
IC693ACC330 TBQC Base for IC693MDL740, IC693MDL742
IC693ACC331 TBQC Base for IC693MDL741
IC693ACC332 TBQC Base for IC693MDL940
IC693ACC333 TBQC Base for IC693MDL340
IC693ACC334 Module Connector for use with all 9030 terminal bases
IC693ACC335 Axis Terminal Block for the Motion Mate DSM302
IC693ACC336 Auxiliary Terminal Block for the Motion Mate DSM302
IC693ACC337 TBQC Base for IC693MDL654/655/752/753
IC693ACC338 CPU364 FACEPLATE KIT CONTAINS 5 EACH FRONT PLASTIC AND LABELS
IC693ACC340 Redundant Power Supply Base (RPSB) with 0.1 meter cable to connect to Power Supply Adapter module. Supports any Series 90-30 power supply.
IC693ACC341 Redundant Power Supply Base with 0.5 meter cable to connect to Power Supply Adapter module. Supports any Series 90-30 power supply.
IC693ACC350 Redundant Power Supply Adapter (RPSA) Module. The RPSA replaces the power supply on a CPU base or expansion base and connects to a Redundant Power Supply Base.
IC693ACC760 Solenoind Valve Module Forcing Pendent
IC693ADC311 CIMPLICITY 90-ADS Coprocessor (Repeat Systems)
IC693ADS301 CIMPLICITY 90-ADS Package (First System)
IC693ALG222 Analog Input, Voltage 16 Single/8 Differential Channels
IC693ALG222LT Analog Input, Voltage 16 Single/8 Differential Channels (LT)
IC693ALG390 Analog Output, Voltage, 2 Channels
IC693ALG390LT Analog Output, Voltage, 2 Channels (LT)
IC693ALG392 High Density Analog Output (8 Channels)
IC693ALG392LT High Density Analog Output (8 Channels) (LT)
IC693ALG442 Analog Combo Module 4IN/2OUT
IC693ALG442LT Analog Combo Module 4IN/2OUT (LT)
IC693APU300 High Speed Counter (HSC)
IC693APU300LT High Speed Counter (HSC) (LT)
IC693APU301 Axis Positioning Module (APM), 1 Axis
IC693APU302 Axis Positioning Module (APM), 2 Axis
IC693APU305 I/O Processor Module
IC693BEM320 I/O Link Interface Module (Slave)
IC693BEM321 I/O Link Interface Module (Master)
IC693BEM331 Genius Bus Controller
IC693BEM331LT Genius Bus Controller (supports I/O and Datagrams) (LT)
IC693CBK001 Cable Kit for High Density I/O Modules (includes CBL327 and CBL328)
IC693CBK002 Cable Kit for High Density I/O Modules (includes CBL329 and CBL330)
IC693CBK003 Cable Kit for High Density I/O Modules (includes CBL331 and CBL332)
IC693CBK004 Cable Kit for High Density I/O Modules (includes CBL333 and CBL334)
IC693CBL300 Cable, I/O Expansion, 1 Meter
IC693CBL301 Cable, I/O Expansion, 2 Meters
IC693CBL302 Cable, I/O Expansion, 15 Meters
IC693CBL303 Cable, Hand Held Programmer (HHP), 2 Meters
IC693CBL304 Cable, Port Expansion, Used With PCM300
IC693CBL305 Cable, Port Expansion, Used With PCM301, PCM311, and CMM311
IC693CBL306 Cable, Extension, 1 Meter (Use with MDL652-653, MDL750-751)
IC693CBL307 Cable, Extension, 2 Meters (Use with MDL652-653, MDL750-751)
IC693CBL308 Cable, Single Connector, 1 Meter (Use with MDL652-653, MDL750-751)
IC693CBL309 Cable, Single Connector, 2 Meters (For MDL652-653, MDL750-751)
IC693CBL311 Cable, APM300/MCS300 Digital I/O, 24 Pin, 3 Meters
IC693CBL312 Cable, I/O Expansion, 0.15 Meters, Shielded
IC693CBL313 Cable, I/O Expansion, 8 Meters
IC693CBL316 Station Manager Serial Cable for Ethernet TCP/IP
IC693CBL324 Cable, Terminal Board Connections for DSM302, 1 Meter
IC693CBL325 Cable, Terminal Board Connections for DSM302, 3 Meters
IC693CBL327 Cable, Left Side, One - 24 Pin 90 Degree Connector, 3 Meter
IC693CBL328 Cable, Right Side, One - 24 Pin 90 Degree Connector, 3 Meter
IC693CBL329 Cable, Left Side, Two - 24 Pin 90 Degree Connectors, 1 Meter
IC693CBL330 Cable, Right Side, Two - 24 Pin 90 Degree Connectors, 1 Meter
IC693CBL331 Cable, Left Side, Two - 24 Pin 90 Degree Connectors, 2 Meter
IC693CBL332 Cable, Right Side, Two - 24 Pin 90 Degree Connectors, 2 Meter
IC693CBL333 Cable, Left Side, Two - 24 Pin 90 Degree Connectors, .5 Meter
IC693CBL334 Cable, Right Side, Two - 24 Pin 90 Degree Connectors, .5 Meter
IC693CDC200 Series 90-30 CsCAN interface module. One CsCAN port and one programming port for network devices.
IC693CHS391 Base, CPU, 10 Slots, Use With CPU331/CSE331 and above
IC693CHS391LT Base, CPU, 10 Slots, Use With CPU331/CSE331 and above (LT)
IC693CHS392 Base, Expansion, 10 Slots
IC693CHS392LT Base, Expansion, 10 Slots (LT)
IC693CHS393 Base, Remote Expansion, 10 Slots (700 ft.)
IC693CHS393LT Base, Remote Expansion, 10 Slots (700 ft.) (LT)
IC693CHS397 Base, CPU, 5 Slots, Use With CPU331/CSE331 and above
IC693CHS397LT Base, CPU, 5 Slots, Use With CPU331/CSE331 and above (LT)
IC693CHS398 Base, Expansion, 5 Slots
IC693CHS398LT Base, Expansion, 5 Slots (LT)
IC693CHS399 Base, Remote Expansion, 5 Slots (700 ft.)
IC693CHS399LT Base, Remote Expansion, 5 Slots (700 ft.) (LT)
IC693CMM301 Genius Communications Module, GCM (256 bits)
IC693CMM302 Communication Module, Genius (1 Kbyte) GCM+
IC693CMM302LT Communication Module, Genius (1 Kbyte) GCM+ (no datagram support) (LT)
IC693CMM311 Communications Module, CCM, RTU, SNP, and SNPx Protocols
IC693CMM311LT Communications Module, CCM, RTU, SNP, and SNPx Protocols (LT)
IC693CMM321 Ethernet Interface TCP/IP Module
IC693CPU311 5-Slot Base With CPU in base (6K Bytes User Program)
IC693CPU311LT 5-Slot Base With CPU in base (6K Bytes User Program) (LT)
IC693CPU313 5-Slot Base With Turbo CPU in base (.6 msec), 1K Registers, (12K Bytes User Program)
IC693CPU313LT 5-Slot Base With Turbo CPU in base (.6 msec), 1K Registers, (12K Bytes User Program) (LT)
IC693CPU323 10-Slot Base With Turbo CPU in base (.6 msec) 12K bytes User Program
IC693CPU323LT 10-Slot Base With Turbo CPU in base (.6 msec) 12K bytes User Program (LT)
IC693CPU331 CPU 331 Module (16K Bytes)
IC693CPU331LT CPU 331 Module (16K Bytes)   (LT)
IC693CPU340 CPU 340 Module (32K Bytes user memory), 10K Registers, .3 msec/K
IC693CPU341 CPU 341 Module (80K Bytes user memory), 10K Registers, .3 msec/K
IC693CPU350 CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K
IC693CPU350LT CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K   (LT)
IC693CPU351 CPU 351 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks) two built-in Serial Ports .22msec/K
IC693CPU352 CPU 352 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks, Hardware FLOATING POINT MATH), two built-in Serial Ports .22msec/K
IC693CPU352LT CPU 352 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks, Hardware FLOATING POINT MATH), two built-in Serial Ports .22msec/K   (LT)
IC693CPU360 CPU 360 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K
IC693CPU360CA Series 90-30 CPU360 with Conformal Coated.
IC693CPU360LT CPU 360 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K   (LT)
IC693CPU363 CPU 363 Module (240K Bytes configurable user memory)
IC693CPU363LT CPU 363 Module (240K Bytes configurable user memory) (LT)
IC693CPU364 CPU 364 Module (240K Bytes configurable user memory), Embedded Ethernet
IC693CPU366 CPU 366 Module (240K Bytes configurable Supports Profibus DP Master (Version 1 supported). One Profibus port and one RS-232 service port.
IC693CPU367 CPU 367Module (240K Bytes configurable Supports Profibus DP Slave (Version 1 supported). One Profibus port and one RS-232 service port.
IC693CPU374 CPU 374 Module (240K Bytes configurable user memory) The battery for the CPU is now included in the CPU backplane box, Embedded Ethrnet 10/100Mbs w/built-in switch. No serial ports.
IC693CPU374CA Series 90-30 CPU374 Conformal Coated.
IC693CPU500 Series 90-30 Cscape CPU supports 1,024 I/O. The processor can be programmed the same as the OCS products over the built-in network that supports CsCAN or DeviceNet Slave.
IC693CSE311 Series 90-30 5-Slot State Logic CPU in base Model 311
IC693CSE313 Series 90-30 5-Slot State Logic CPU in base Model 313
IC693CSE323 Series 90-30 10-Slot State Logic CPU in base Model 323
IC693CSE331 Series 90-30 Modular State Logic CPU 331
IC693CSE340 Series 90-30 Modular State Logic CPU 340
IC693DNM200 DeviceNet Master
IC693DNS201 DeviceNet Slave
IC693DSM302 Series 90-30 Motion Mate DSM302 Motion Controller, 2 Axis
IC693DSM314 Series 90-30 DSM314 Motion Controller, 1-4 axis
IC693DSM324 DSM324i 4-axis motion controller for the Series90-30
IC693LBR301 90-30 Documentation Library (paper manuals covering most options)
IC693MAR590 Mixed I/O, 120Vac Input (8 points), Relay Output (8 points)
IC693MAR590LT Mixed I/O, 120Vac Input (8 points), Relay Output (8 points) (LT)
IC693MCD001 Demo case, Beta Series Servo
IC693MCM001 Series 90-30 Digital Servo Interface Module
IC693MDL230 120 Vac Isolated Input (8 Points)
IC693MDL230LT 120 Vac Isolated Input (8 Points) (LT)
IC693MDL231 240 Vac Isolated Input (8 Points)
IC693MDL231LT 240 Vac Isolated Input (8 Points)   (LT)
IC693MDL240 120 Vac Input (16 Points)
IC693MDL240LT 120 Vac Input (16 Points)   (LT)
IC693MDL241 24 Vac/Vdc Input (16 Points)
IC693MDL241LT 24 Vac/Vdc Input (16 Points)   (LT)
IC693MDL250 120 Vac Isolated Input (16 points). Module requires a terminal block IC694TBBx32 or IC693TBSx32).
IC693MDL260 32 Point 120VAC Input Module. Requires terminal block IC694TBxx32.
IC693MDL310 120 Vac Output, 0.5 Amp (12 Points)
IC693MDL330 120/240 Vac Output, 2 Amp (8 Points)
IC693MDL330LT 120/240 Vac Output, 2 Amp (8 Points) (LT)
IC693MDL340 120 Vac Output, 0.5 Amp (16 Points)
IC693MDL340LT 120 Vac Output, 0.5 Amp (16 Points) (LT)
IC693MDL350 120/240 Vac Isolated Output, 2 Amp (16 Points). Module requires a terminal block (IC694TBBx32 or IC693TBSx32).
IC693MDL390 120/240 Vac Isolated Output, 2 Amp (5 Points)
IC693MDL390LT 120/240 Vac Isolated Output, 2 Amp (5 Points) (LT)
IC693MDL632 125 Vdc Input (8 Points)
IC693MDL632LT 125 Vdc Input (8 Points) (LT)
IC693MDL634 24 Vdc Input, Negative/Positive Logic (8 Points)
IC693MDL634LT 24 Vdc Input, Negative/Positive Logic (8 Points) (LT)
IC693MDL645 24 Vdc Input, Neg/Pos Logic (16 Points)
IC693MDL645LT 24 Vdc Input, Neg/Pos Logic (16 Points) (LT)
IC693MDL646 24 Vdc Input, Neg/Pos Logic, 1 msec Filter (16 points)
IC693MDL646LT 24 Vdc Input, Neg/Pos Logic, 1 msec Filter (16 points)   (LT)
IC693MDL648 48VDC Input, Neg/Pos Logic, 1 msec filter, Neg/Pos Logic (16 points)
IC693MDL653 24 Vdc Input, Neg/Pos Logic, 2msec Filter (32 Points)
IC693MDL654 5/12 Vdc (TTL) Input, Neg/Pos Logic, (32 points)
IC693MDL654LT 5/12 Vdc (TTL) Input, Neg/Pos Logic, (32 points) (LT)
IC693MDL655 24 Vdc Input, Neg/Pos Logic, 1 ms, (32 pts)
IC693MDL655LT 24 Vdc Input, Neg/Pos Logic, 1 ms, (32 pts) (LT)
IC693MDL660 24VDC Input Module 32 point. The module requires a terminal block (IC694TBB032 box style or IC694TBS032 springclamp style terminal block).Terminal block is sold seperately.
IC693MDL730 12/24 Vdc Output, 2 Amp, Positive Logic (8 Points)
IC693MDL730LT 12/24 Vdc Output, 2 Amp, Positive Logic (8 Points) (LT)
IC693MDL731 12/24 Vdc Output, 2 Amp, Negative Logic (8 Points)
IC693MDL731LT 12/24 Vdc Output, 2 Amp, Negative Logic (8 Points) (LT)
IC693MDL732 12/24 Vdc Output, 0.5 Amp, Positive Logic (8 Points)
IC693MDL733 12/24 Vdc Output, 0.5 Amp, Negative Logic (8 Points)
IC693MDL734 125 Vdc Output, (6 Points)
IC693MDL734LT 125 Vdc Output, (6 Points) (LT)
IC693MDL740 12/24 Vdc Output, 0.5 Amp, Positive Logic (16 Points)
IC693MDL740LT 12/24 Vdc Output, 0.5 Amp, Positive Logic (16 Points) (LT)
IC693MDL741 12/24 Vdc Output, 0.5 Amp, Negative Logic (16 Points)
IC693MDL741LT 12/24 Vdc Output, 0.5 Amp, Negative Logic (16 Points) (LT)
IC693MDL742 12/24 Vdc Output, 1 Amp, Positive Logic (16 Points), Fused
IC693MDL742LT 12/24 Vdc Output, 1 Amp, Positive Logic (16 Points), Fused (LT)
IC693MDL748 48VDC Output, 0.5 Amps, Positive Logic (8 points)
IC693MDL750 12/24 Vdc Output, Negative Logic (32 Points)
IC693MDL751 12/24 Vdc Output, Positive Logic (32 Points)
IC693MDL752 5/12/24 Vdc (TTL) Output, Neg Logic, (32 points)
IC693MDL752LT 5/12/24 Vdc (TTL) Output, Neg Logic, (32 points) (LT)
IC693MDL753 12/24 Vdc Output, Pos Logic (32 Pts)
IC693MDL753LT 12/24 Vdc Output, Pos Logic (32 Pts) (LT)
IC693MDL754 12/24VDC Output (0.75 amps per point) Module 32 point. The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block).
IC693MDL760 Solenoid Valve Output (11 Points)/ 24VDC Output ,0.5 Amp, Positive Logic (5 Points)
IC693MDL930 Relay Output, Isolated, 4 Amp (8 Points)
IC693MDL930LT Relay Output, Isolated, 4 Amp (8 Points) (LT)
IC693MDL931 Relay Output, 8 Amp Form B/C contacts, Isolated in groups of 4
IC693MDL931LT Relay Output, 8 Amp Form B/C contacts, Isolated in groups of 4 (LT)
IC693MDL940 Relay Output, 2 Amp (16 Points)
IC693MDL940LT Relay Output, 2 Amp (16 Points) (LT)
IC693MDR390 Mixed I/O, 24Vdc Input (8 points), Relay Output (8 points)
IC693MDR390LT Mixed I/O, 24Vdc Input (8 points), Relay Output (8 points) (LT)
IC693MLX000 Series 90-30 I/O Modules Label Kit (various quantities)
IC693NIU004 Series 90-30 Ethernet NIU (Ethernet I/O)
IC693NIU004CA Series 90-30 Ethernet NIU Conformal Coated. 10/100Mbit Ethernet.
IC693PBM200 Profibus DP Master Module
IC693PBS201 Profibus DP Slave Module
IC693PCM300 Prog. Coproc. Mdl., 160 KB (35 KB Basic Prgm), w/Port Exp. Cbl.
IC693PCM300LT Prog. Coproc. Mdl., 160 KB (35 KB Basic Prgm), w/Port Exp. Cbl. (LT)
IC693PCM300LTMP Prog. Coproc. Mdl., 160 KB (35 KB Basic Prgm), w/Port Exp. Cbl. Modified for use by OEMs (LT)
IC693PCM300-MP Prog. Coproc. Mdl., 160 KB (35 KB Basic Prgm), w/Port Exp. Cbl. Modified for use by OEMs
IC693PCM301 Prog. Coproc. Mdl., 192 KB (47 KB Basic Prgm), w/Port Exp. Cbl.
IC693PCM301LT Prog. Coproc. Mdl., 192 KB (47 KB Basic Prgm), w/Port Exp. Cbl. (LT)
IC693PCM311 Prog. Coproc. Mdl., 640 KB (190 KB Basic Prgm), w/Port Exp. Cbl.
IC693PCM311LT Prog. Coproc. Mdl., 640 KB (190 KB Basic Prgm), w/Port Exp. Cbl. (LT)
IC693PIF301 PC/AT Interface (PCIF) to Series 90-30 I/O with software
IC693PIF350 Series 90-30 I/O PCI Bus interface board. Enables users to connect Series 90-30 I/O to a PCI interface board.
IC693PIF400 High Performance PC/AT Interface (PCIF) to Series 90-30 I/O with software
IC693PRG300 Hand Held Programmer (HHP) With Cable & Manual
IC693PTM100 Power Transducer Module (Includes module, interface, 0.5m cable)
IC693PTM101 Power Transducer Module (includes module, interface, 1m cable)
IC693PWR321 Power Supply, 120/240 Vac, 125 Vdc, Standard
IC693PWR321LT Power Supply, 120/240 Vac, 125 Vdc, Standard (LT)
IC693PWR322 Power Supply, 24/48 Vdc, Standard
IC693PWR322LT Power Supply, 24/48 Vdc, Standard (LT)
IC693PWR328 Power Supply, 48 Vdc, Standard
IC693PWR328LT Power Supply, 48 Vdc, Standard (LT)
IC693PWR330 Power Supply, 120/240 Vac, 125 Vdc, High Capacity
IC693PWR331 Power Supply, 24 Vdc, High Capacity
IC693PWR332 Power Supply, 12 Vdc input, 30-watt output, High Capacity

FANUC PAC RX3I GETECH

IC694ACC300 INPUT SIMULATOR MODULE 16 POINTS
IC694ACC310 RX3i Blank filler module
IC694ALG220 INPUT MODULE ANALOG 4 POINT VOLTAGE
IC694ALG221 INPUT MODULE ANALOG 4 POINT CURRENT
IC694ALG222 INPUT MODULE ANALOG 16 SINGLE ENDED 8 DIFFERENTIAL VOLTAGE
IC694ALG223 INPUT MODULE ANALOG 16 SINGLE ENDED 8 DIFFERENTIAL CURRENT
IC694ALG390 OUTPUT MODULE ANALOG 2 POINT VOLTAGE
IC694ALG391 OUTPUT MODULE ANALOG 2 POINT CURRENT
IC694ALG392 OUTPUT MODULE ANALOG CURRENT VOLTAGE 8 POINT
IC694ALG442 ANALOG COMBINATION MODULE CURRENT VOLTAGE 4 INPUT 2 OUTPUT
IC694APU300 HIGH SPEED COUNTER MODULE 200KHZ A B AND C TYPE
IC694APU305 I/O Processor high speed counter for Gray Code Encoder or A QUAD B Encoder.  30 kHz Abolute Encoder or 200 kHz A QUAD B Encoder.
IC694BEM320 RX3i Communication Module, I/O Link Interface Module (Slave).  Module uses RX3i high speed serial bus.
IC694BEM321 RX3I Communication Module, I/O Link Interface Module (Master).  Module is on the high speed serial bus.
IC694BEM331 RX3i Genius Bus Controller (supports I/O and Datagrams). Module connectsto the serial bus.  Requires CPU firmware 2.9 or higher and requires Proficy Machine Edition Version 5.00 SP1A Logic Developer-PLC, Hot Fix 1or later for configuration.
IC694CHS392 Base Expansion 10 Slots
IC694CHS398 Base Expansion 5 Slots
IC694DSM314 MOTION CONTROLLERMODULE 1-2 axis Digital Servo or 1-4 Axis Analog Servo
IC694DSM324 DSM324i 4-axis motion controller for the RX3i
IC694MDL230 INPUT MODULE 120 VAC 8 POINT ISOLATED
IC694MDL231 INPUT MODULE 240 VAC 8 POINT ISOLATED
IC694MDL240 INPUT MODULE 120 VAC 16 POINT
IC694MDL241 INPUT MODULE 24 VAC 16 POINT
IC694MDL250 120 Vac Isolated Input (16 points).  Module requires a terminal block IC694TBBx32 or IC693TBSx32).  Only compatible with RX3i controllers.
IC694MDL260 32 Point 120VAC Input Module.  Requires terminal block IC694TBxx32. Compatible with RX3i only and requires firmware 3.5 and ME 5.5 or higher
IC694MDL310 OUTPUT MODULE 120 VAC 0.5 AMPS 12 POINT
IC694MDL330 OUTPUT MODULE 120/240 VAC 2AMPS 8 POINTS
IC694MDL340 OUTPUT MODULE 120 VAC 0.5AMPS 16 POINTS
IC694MDL350 120/240 Vac Isolated Output, 2 Amp (16 Points). Module requires a terminal block (IC694TBBx32 or IC693TBSx32).  Only compatible with RX3i controllers.
IC694MDL390 OUTPUT MODULE 120/240 VAC 2AMPS 5 POINT ISOLATED
IC694MDL632 INPUT MODULE 125 VDC 8 POINT POS/NEG LOGIC
IC694MDL634 INPUT MODULE 24 VDC 8 POINT POS/NEG LOGIC
IC694MDL645 INPUT MODULE 24 VDC 16 POINT POS/NEG LOGIC
IC694MDL646 INPUT MODULE 24 VDC 16 POINT POS/NEG LOGIC 1 MSEC FILTER
IC694MDL654 INPUT MODULE 5/12 VDC (TTL) 32 POINT POS/NEG LOGIC
IC694MDL655 INPUT MODULE 24VDC 32 POINT POS/NEG LOGIC
IC694MDL660 RX3i 24VDC Input Module 32 point.  Module is supported by serial bus andis not limited to the universal base or expansion base.  The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block).
IC694MDL730 OUTPUT MODULE 12/24 VDC 2AMPS 8 POINTS POSIVIVE LOGIC
IC694MDL732 OUTPUT MODULE 12/24 VDC 0.5AMPS 8 POINTS POSITIVE LOGIC
IC694MDL734 OUTPUT MODULE 125VDC 1AMP 6 POINTS ISOLATED POS/NEG LOGIC
IC694MDL740 OUTPUT MODULE 12/24 VDC 0.5AMPS 16 POINTS POSITIVE LOGIC
IC694MDL741 OUTPUT MODULE 12/24 VDC 0.5AMP 16 POINT NEGATIVE LOGIC
IC694MDL742 OUTPUT MODULE 12/24 VDC 1AMP 16 POINT POSITIVE LOGIC ESCP PROTECTION
IC694MDL752 OUTPUT MODULE 5/24 VDC (TTL) 0.5AMP 32 POINT NEGATIVE LOGIC
IC694MDL753 OUTPUT MODULE 12/24 VDC 0.5AMP 32 POINT POSITIVE LOGIC
IC694MDL754 12/24VDC Output (0.75 amps per point)Module 32 point. The module can be used on expansion bases (uses high speed serial bus). The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block).
IC694MDL930 OUTPUT MODULE RELAY 4AMP 8 POINT ISOLATED
IC694MDL931 OUTPUT MODULE RELAY 3AMP FORM B-C 8 POINT ISOLATED
IC694MDL940 OUTPUT MODULE RELAY 2AMP 16 POINTS
IC694PWR321 Power Supply 120/240 VAC 125 VDC Standard
IC694PWR330 Power Supply 120/240 Vac 125 Vdc High Capacity
IC694PWR331 Power Supply 24 Vdc High Capacity.
IC694TBB032 Box Style High Density Terminal Block - 36 Connections
IC694TBB132 36 Point Terminal Block,box style extended depth shroud.  Compatible with new high density I/O modules for both RX3i and Series 90-30
IC694TBS032 Spring Clamp Style High Density Terminal Block - 36 Connections
IC694TBS132 36 Point Terminal Block,spring clamp style extended depth shroud. Compatible with new high density I/O modules for both RX3i and Series 90-30.
IC695ACC600 RX3i Cold Junction Compensation Kit \ for Universal Analog Input IC695ALG600
IC695ALG600 UNIVERSAL ANALOG MODULE. 8 CHANNELS OF ANALOG CONFIGURABLE FOR THERMOCOUPLE, RTD, RESISTIVE, CURRENT, OR VOLTAGE. 2 ISOLATED GROUPS, 4 CHANNELS PER GROUP Terminal block ordered seperately.
IC695ALG608 Analog Input module, 8 channels single ended, 4 channels differential, channels are configurable for voltage and current.
IC695ALG608CA Conformal Coated Analog Input Module, 8 Channel voltage/current. Module does not include terminal block.
IC695ALG616 Analog Input module, 16 channels single ended, 8 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA;  Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.
IC695ALG616CA Conformal Coated Analog Input Module,16 channel voltage/current.  Moduledoes not include terminal block.
IC695ALG626 Analog Input HART module, 16 channels single ended, 8 channels differential,channels are configurable for voltage,current and current/ HART.
IC695ALG628 Analog Input HART module, 8 channels single ended, 4 channels differential,channels are configurable for voltage,current and current/ HART.
IC695ALG704 Analog Output Module, 4 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA;  Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated.  Up to 16 bit resolution.
IC695ALG704CA Conformal Coated Analog Output Module,4 channel voltage/current.  Moduledoes not include terminal block.
IC695ALG708 Analog Output Module, 8 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA;  Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated.  Up to 16 bit resolution.
IC695ALG708CA Conformal Coated Analog Output Module,8 channel voltage/current.  Moduledoes not include terminal block.
IC695ALG728 Analog Output HART Module, 8 channels,that is configurable for voltage, current, current/HART configured for Current: 0 to 20mA, 4 to 20mA;
IC695CHS012 RX3i BASE 12 SLOTS
IC695CHS012CA RX3i 12 slot universal backplane. Conformal Coated.
IC695CHS016 RX3i BASE 16 SLOTS
IC695CHS016CA RX3i 16 universal slots backplane with conformal coating.
IC695CPU310 300Mhz CPU with 10Meg of memory 2 SERIAL PORTS (occupies two slots on system base)
IC695DEM001 RX3i Demo Case: RX3i and simulator.Demo includes CPU, power supply, input simulator, output, high speed counter,analog, digital servo and universal analog module.  Simulator includes analog meter, pot, encoder and LEDs.
IC695DEM002 RX3i type 2 demo case.  Demo includes CPU, power supply, Ethernet, inputsimulator, output, high speed counter, analog combo, Universal analog, and digital servo modules.  Demo also includes QuickPanel control/view
IC695DEM003 RX3i type 3 demo stand.  Demo includes, CPU, power supply, Ethernet, input simulator, output, high speed counter, comination analog, Universal analog, and digital servo module, QuickPanel control/View, and S2K amplifier and motor
IC695ETM001 Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base
IC695ETM001CA RX3i Ethernet Mdl,10/100Mbits,Conformal Coated.
IC695LRE001 RX3i Local Expansion Module Occupies no system slots on base
IC695LRE001CA RX3i Local Serial Expansion Conformal Coated.
IC695NKT001 RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet module (IC695ETM001).  ENIU supports two serial ports and 20k of local logic.  TheENIU must be installed in a IC695CHSxxx base.
IC695PBM300 RX3i PROFIBUS Master Module (must be installed on RX3i PCI bus).  The module supports PROFIBUS V1 Master functionality.  The PROFIBUS Master module requires an RX3i CPU with firmware version 2.9 or later
IC695PBS301 Profibus Slave module that supports V1 functionality.  The Profibus Slave module utilizes the RX3i PCI bus and will only work on the RX3i Universal base.
IC695PSA040 RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on system base
IC695PSA040CA RX3i AC Power Supply, 40 Watt Conformal Coated
IC695PSA140 120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load-sharing and redundancy application.
IC695PSD040 Power supply 24VDC 40 watts occupies one slot on system base
IC695PSD040CA RX3i 24VDC Power Supply, 40 Watt Conformal Coated.
IC695PSD140 24VDC  Multipurpose Power Supply is suitable for use in load-sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane.
IC695STK001 RX3i Power PACkage 1 Starter Kit includes RX3i with software.  (includesRX3i with software.  (includes one each IC695CPU310, IC695CHS012, IC695LRE001, IC695PSA040, IC695ETM001, IC694ACC300, IC694MDL940 and IC646MPP001.)
IC695STK002 Includes RX3i and QuickPanel View 6 inch STD with software (one each IC695CPU310/ IC695CHS012/ IC69 5LRE001/ IC695PSA040/ IC695ETM001/ IC694ACC300/ IC694MDL940/ IC754VSI06STD/ BC646MQP001/ IC646MPP001 and DC power)
IC695STK003 RX3i Power PACkage 3 Starter Kit includes RX3i/ motion module (Servo andAmplifier sold seperately) and QuickPanel View 6 inch STD wi th software

Fanuc PLC VersaMax

IC200CPU001 CPU with 34kB Configurable Memory, Two Ports - RS-232 And RS-485 
IC200CPU002 CPU with 42kB Configurable Memory, Two Ports - RS-232 And RS-485 
IC200CPU005 CPU with 64kB Configurable Memory, Two Ports - RS-232 And RS-485 
IC200CPUE05 CPU with Two Serial Ports, Embedded Ethernet Interface,and 64K Configurable Memory

IC200MDL140 Input 120VAC, 8 Points 
IC200MDL141 Input 240VAC, 8 Points Module 
IC200MDL143 Input 120VAC 8 Point Isolated 
IC200MDL144 Input 240VAC 4 Point Isolated Module 
IC200MDL240 Input 120VAC, 16 Points 
IC200MDL241 Input 240VAC, 16 Points 
IC200MDL243 Input 120VAC 16 Point Isolated Module 
IC200MDL244 Input 240VAC 8 Point Isolated Module 
IC200MDL631 Input 125VDC Positive/Negative Logic 8 Point Isolated Module 
IC200MDL632 Input 125VDC Positive/Negative Logic 16 Point Isolated Module 
IC200MDL635 Input 48VDC Positive/Negative Logic (2 Groups of 8) 16 Point Module 
IC200MDL636 Input 48VDC Positive/Negative Logic (4 Groups of 8) 32 Point Module
IC200MDL640 Input 24VDC Positive Logic, 16 Points 
IC200MDL643 Input 5/12VDC (TTL) Positive/Negative Logic (2 Groups of 8) 16 Point Module
IC200MDL644 Input 5/12VDC (TTL) Positive/Negative Logic (4 Groups of 8) 32 Point Module 
IC200MDL650 Input 24VDC Positive Logic, 32 Points

IC200MDL329 Output 120VAC 0.5A per Point Isolated 8 Point Module 
IC200MDL330 Output 120VAC 0.5A per Point Isolated 16 Point Module 
IC200MDL331 Output 120VAC 2.0A per Point Isolated 8 Point Module
IC200MDL730 Output 24VDC Positive Logic 2.0A per Point (1 Group of 8) w/ESCP 8 Point Module 
IC200MDL740 Output 12/24VDC Positive Logic 0.5A per Point (1 Group of 16) 16 Point Module 
IC200MDL741 Output 24VDC Positive Logic 0.5A per Point (1 Group of 16) w/ESCP 16 Point Module 
IC200MDL742 Output 24VDC Positive Logic 0.5A per Point (2 Groups of 16) w/ESCP 32 Point Module 
IC200MDL743 Output 5/12/24VDC Negative Logic 0.5A per Point (1 Group of 16) 16 Point Module 
IC200MDL744 Output 5/12/24VDC Negative Logic 0.5A per Point (2 Groups of 16) 32 Point Module 
IC200MDL750 Output 12/24VDC Positive Logic 0.5A per Point (2 Groups of 16) 32 Point Module 
IC200MDL930 Output Relay 2.0 Amp, Isolated Form A 8 Points 
IC200MDL940 Output Relay 2.0 Amp, Isolated Form A 16 Points

IC200MDD840 Mixed 24VDC Pos Log Input 20 Points / Output Relay 2.0 Amp 12 Points 
IC200MDD841 Mixed 24VDC Pos Log Input 20 Points / Output 24VDC 0.5 Amp 12 Points / High Speed Counter, PWM or Pulse Train Configurable Points
IC200MDD842 Mixed 24VDC Pos Log Input 16 Points / Output 24VDC 0.5 Amp with Electronic Short Circuit Protection 16 Points
IC200MDD843 Mixed 24VDC Pos Log Input 10 Points / Output Relay 6 Points
IC200MDD844 Mixed 24VDC Pos Log Input 16 Points / Output 24VDC 0.5 Amp 16 Points
IC200MDD845 Mixed 24VDC Pos Log Input 16 Points / Output Relay 2.0 Amp Iso 8 Points
IC200MDD846 Mixed 120VAC Input 8 Points / Output Relay 2.0 Amp Isolated 8 Points
IC200MDD847 Mixed 240VAC Input 8 Points / Output Relay 2.0 Amp Isolated 8 Points
IC200MDD848 Mixed 120VAC Input 8 Points / Output 120VAC 0.5 Amp Isolated 8 Points 
IC200MDD849 Mixed 120VAC Input Isolated 8 Point / Output Relay 2.0A per Point Isolated 8 Point Module 
IC200MDD850 Mixed 240VAC Input Isolated 4 Point /Output Relay 2.0A per Point Isolated 8 Point Module

IC200ALG230 Analog Input 12 Bit Voltage/Current, 4 Channels 
IC200ALG240 Analog Input Module, 16 Bit Voltage/Current, 1500VAC Isolation, 8 Channels 
IC200ALG260 Analog Input 12 Bit Voltage/Current, 8 Channels 
IC200ALG620 Analog Input 16 Bit RTD, 4 Channels 
IC200ALG630 Analog Input 16 Bit Thermocouple, 7 Channels

IC200ALG320 Analog Output 12 Bit Current, 4 Channels 
IC200ALG321 Analog Output 12 Bit 0-10V Voltage, 4 Channels 
IC200ALG322 Analog Output 12 Bit +/-10V Voltage, 4 Channels 
IC200ALG323 Analog Output Module, 16 Bit Voltage/Current, 1500VAC Isolation, 4 Channels

IC200ALG430 Analog Mixed 12 Bit Input Current 4 Channels / Output Current 2 Channels 
IC200ALG431 Analog Mixed 12 Bit 0-10V Input 4 Channels / Output 0-10V 2 Channels 
IC200ALG432 Analog Mixed Module, 12 Bit -10 to +10VDC Input 4 Channels / Output -10 to +10VDC 2 Channels

Fanuc Versamax Micro

IC200UAL005 
Power Supply 23 point relay out Analog Out 24VDC

IC200UAL006 
Power Supply 23 Point 24VDC In Relay Out 24 VDC Out Analog Out 120V 240AC

IC200UAR014 
Input Relay 120 VAC 14 PTS

IC200UDD020 
PO 24 VDC IN 24VDC Outputs. 20 Point optional communication.

IC200UDD040 
24VDC Power Supply 40 Point PLC 24 VDC IN Serial Port

IC200UDD064 
64 Point PLC Serial Port and optional communication port 24 VDC In 24 VDC source out.

IC200UDD104 
24 VDC Power Supply 24 VDC IN 24 VDC OUT 14 Point PLC

IC200UDD110 
24VDC Power Supply 28 Point PLC 24VDC IN 24VDC OUT

IC200UDD120 
Versamax Micro 28 Pt 24VDC 16 In and 12 Out UDD120

IC200UDR001 
120V 240 AC Power Supply 14 Point PLC 24VDC In Relay Out

IC200UDR002 
14 Point PLC 24 VDC In Relay Out 24VDC Power Supply

IC200UDR005 
Battery Not Included Battery Is Required for data retention 28 Point PLC(16) 24VDC IN(11) relay out(1) 24VDC Out 120V 240 AC Power Supply

IC200UDR010 
24VDC Power Supply 24VDC Out 28 Point PLC 24VDC in relay out

IC200UDR040 
40 Point PLC optional communication port requires machine edit 24VDC in relay out

IC200UDR064 
64 Point PLC (40) 24 DVC Power Supply in relay out. Optional communication port.

IC200UDR164 
24VDC In Relay out 64 Point PLC

IC200UEI008 
24VDC Power Supply 24 VDC IN expansion 8 point

IC200UEI016 
24VDC Power Supply expansion 16 point input IN

IC200UEM001 
The Ethernet module is compatible with SRTP and supports up to 4 connections.

IC200UER008 
8 Output expansion 24 VDC Power Supply

IC200UER016 
16 Output expansion 24VDC Power Supply relay outputs

IC200UEX011 
24VDC IN relay out 120V 240 AC power supply 14 point exp.

IC200UEX012 
24 VDC In Relay Out 24 VDC Power Supply

IC200UEX014 
24 VDC out 24 VDC Power Supply

IC200UEX214 
28 Point expansion 24 VDC In 24 VDC Out 24 VDC Power Supply

IC200UEX616 
1 2VDC Power Supply 6 Channel Analog expansion

IC200UEX624 
4 Channel Analog Input expansion 24 VDC Power Supply

IC200UEX626 
4 Analog Inputs 2 Analog Outputs 6 Channel Analog Expansion

IC200UEX636 
6 Channel Analog expansion 4 Analog inputs and 2 Analog outputs 120/24 VDC Power Supply

IC200UEX724 
RTD Expansion Module

IC200UEX736 
ETD Expansion module 3 wire support and 2 analog output voltage

IC200UMB001 
20/40/64 user program memory module.

IC200UMM102 
Micro Motion 2 Independent axis120/240VAC powered.

IC200USB001 
64 RS-232 communications option board with (2) 0-10 VDC Analog input channels built-in

IC200USB002 
64, RS-485 The option board also supports program storage memory module

QuickPanel

IC754CBF08CTD GE-CONTROL FULLY LOADED 8 INCH TFT BLANK Fanuc 
IC754CBF12CTD GE-CONTROL 64MB/64MB 12IN COLOR TFT BLANK Fanuc 
IC754CBF15CTD GE-15 inch TFT QuickPanel Ctrl/ Fully Loaded/ 24VDC / Blank Label Fanuc
IC754CBL06CTD GE-6 inch TFT QuickPanel Control/ Loaded/ Blank Label/ 24VDC Fanuc 
IC754CBL06MTD GE-Ctrl Loaded 6 In Mono Touch DC Blank Fanuc 
IC754CGF08CTD GE-CONTROL FULLY LOADED 8 INCH TFT GEF Fanuc 
IC754CKF08CTD GE-Starter Kit 8in TFT Ctrl Fully Loaded Fanuc 
IC754CKF12CTD GE-Starter Kit 12in TFT Ctrl Fully Loaded Fanuc 
IC754CKF15CTD GE-Starter Kit/ 15 inch TFT Ctrl Fully Loaded/ 24VDC Fanuc 
IC754CKL06CTD GE-Starter Kit/ 6 inch TFT Ctrl Loaded/ 24VDC Fanuc 
IC754CKL06MTD GE-Starter Kit 6 In Mono Ctrl Loaded 24 VDCVDC Fanuc 
IC754CSF06CTD GE-CONTROL 64MB/64MB 6IN COLOR TFT TOUCH DC Fanuc 
IC754CSF12CTD GE-Control 64MB/64MB 12in Color TFT Touch D Fanuc 
IC754CSF15CTD GE-15 inch TFT QuickPanel Control/ Fully Loaded/ 24VDC Fanuc 
IC754CSL06CTD GE-6 inch TFT QuickPanel Control/ Loaded/ 24VDC Fanuc 
IC754CSL06MTD GE-Ctrl Loaded 6 In Mono Touch DC Fanuc 
IC754CSX06CTD GE-Control 64MB/96MB 6in Color TFT Touch DC Fanuc 
IC754OBF12CTD GE-OEM Version Loaded 12inColor TFT To Fanuc 
IC754OTL06CTD GE-OEM 6in TFT Loaded Thin-Back Door Fanuc 
IC754VBB06CTD GE-6 INCH BASCI TFT WITH BLANK Fanuc 
IC754VBB06MTD GE-View Basic 6 inch Mono Touch DC Blank Fanuc 
IC754VBF08CTD GE-View Loaded 8In Color TFT Touch DC Blank Fanuc 
IC754VBF12CTD GE-View 64/64MB 12in Color TFT Touch Blank Fanuc 
IC754VBF15CTD GE-15 inch TFT QuickPanel View/ Fully Loaded/ 24VDC / Blank Label Fanuc
IC754VBI06MTD GE-View Intermediate 6 inch Mono Touch DC Blank Fanuc 
IC754VBI06STD GE-View Intermediate 6 inch STN Touch DC Blank Fanuc 
IC754VBI08CTD GE-VIEW INTERM 8IN COLOR TFT TOUCH DC BLANK Fanuc 
IC754VBI12CTD GE-View Interm 12 inch Color TFT Touch DC Blank Fanuc 
IC754VBI12MTD GE-View Intermediate 12 Inch Mono Touch DC Blank Fanuc 
IC754VBL06CTD GE-6 inch TFT QuickPanel View/ Loaded/ 24VDC/ Blank Label Fanuc 
IC754VBL06MTD GE-View Loaded 6 In Mono Touch DC Blank Fanuc 
IC754VGB06CTD GE-VIEW BASIC 6IN TFTTOUCH DC FLAT GEF Fanuc 
IC754VGF08CTD GE-VIEW LOADED 8IN COLOR TFT TOUCH DC GEF Fanuc 
IC754VGI06STD GE-VIEW INTERM 6IN STN TOUCH DC FLAT GEF Fanuc 
IC754VGI08CTD GE-VIEW INTERM 8IN COLOR TFT TOUCH DC GEF Fanuc 
IC754VGL06CTD GE-6 inch TFT QuickPanel View, Loaded, 24VDC, Flat Bezel, GE Fanuc Overlay Fanuc 
IC754VSB06CTD GE-VIEW BASIC 6IN TFT TOUCH DC Fanuc 
IC754VSB06MTD GE-View Basic 6 inch Mono Touch DC Fanuc 
IC754VSF12CTD GE-VIEW 64/64MB 12IN COLOR TFT TOUCH DC Fanuc 
IC754VSF15CTD GE-15 inch TFT QuickPanel View/ Fully Loaded/ 24VDC Fanuc 
IC754VSI06MTD GE-View Intermediate 6 inch Mono Touch DC Fanuc 
IC754VSI06SKD GE-VIEW INTERM 6IN STN KEYPAD DC QP OVRLAY Fanuc 
IC754VSI06STD GE-View Intermediate 6 inch STN Touch DC Fanuc 
IC754VSI12CTD GE-View Intermediate 12 inch Color TFT Touch DC Fanuc 
IC754VSI12MTD GE-View Intermediate 12 Inch Mono Touch DC Fanuc 
IC754VSL06CTD GE-6 inch TFT QuickPanel View/ Loaded/ 24VDC Fanuc 
IC754VSL06MTD GE-View Loaded 6 In Mono Touch DC Fanuc

Photos