Top Industrial Automation and Electrical Instrument from HKXYTECH
  • Watson Smith Fail freeze I/P Converter Type 422 AC0111

Watson Smith Fail freeze I/P Converter Type 422 AC0111

2016-04-13 15:48:44

Description:

Watson Smith Fail freeze I/P Converter Type 422 AC0111; The Watson Smith current to pressure converter (I/P converter) Type 422 with its Fail freeze (fail in last position) feature is ideal for field applications. This unit is available with Intrinsically Safe certification.……

Watson Smith Fail freeze I/P Converter Type 422 AC0111, brand new, original in UK;

New Products

Orbinox VG SERIES 61 Slurry knife gate valve

Orbinox SERIES 61 (VG) model knife gate valve is a wafer type valve equipped with two metal reinforced rubber sleeves,designed for applications with abrasive slurries.

Crosby J-Series Direct Spring Pressure Relief Valves

J-Series valves provide high quality and dependable overpressure protection for air, gas, steam, vapor, liquid and two-phase applications in one simple design. Now available with two new to the world technologies, Balanced Diaphragm and Bellows Leak Detection.

Vanessa Series 30,000 Cryogenic Triple Offset Valve

The Vanessa Series 30,000 Cryogenic Triple Offset Valve is a virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations.

Sempell Model SOT High pressure steam safety valve

The Sempell Model SOT is a high-pressure steam safety valve designed for boiler protection and steam system safety.

Assortments

Description

Watson Smith Fail freeze I/P Converter Type 422 AC0111


The Watson Smith current to pressure converter (I/P converter) Type 422 with its Failfreeze (fail in last position) feature is ideal for field applications. This unit is available with Intrinsically Safe certification.

  ATEX I.S. I/P Converter Advanced electronic control Fail freeze operation (output pressure retained on power failure) Minimum vibration effects High accuracy Captured bleed as standard;


All electronic I/P converters have closed loop control, excellent vibration resistance, long term stability and can be mounted in any orientation.

4-20mA signal and a range of output variations.


 Electronic I/P Converters Type 422 (Watson Smith Failfreeze I/P Converter Type 422)

All electronic I/P converters have closed loop control, excellent vibration resistance, long term stability and can be mounted in any orientation. 4-20mA signal and a range of output variations.


Specifications:

  • 3-15psi, 3-120psi, 0.2-1bar, 0.2-8bar output options

  • High Flow - 280 l/min (10scfm)

  • Faifreeze drift rate < 2% setpoint/hour

  • IP65 rating

  • Type N or Intrinsically Safe options


Technical features Medium: Oil free, dry air, filtered to 5 μm Output pressure: 0,2 ... 1 bar 

Supply pressure: at least 0,7 bar above maximum required output pressure maximum 4 bar gauge 

Flow capacity: Up to 250 Nl/min Air consumption: √ 0,4 Nl/min 

Linearity: 0,5 % of span 

Hysteresis: Typically  0,5% of span 

Vibration effect: 1 % of span for vibration level up to 4 mm, 5 ... 15 Hz, 3g 15 ... 500 Hz in any orientation. 


Response time: < 6 sec 10 ... 90% into a 0,5 l volume < 6 sec 90 ... 10% into a 0,5 l volume 

Temperature sensitivity: Typically < 0,1 % span/°C between -10°C and +60° 

Supply sensitivity: Typically < 0,5% of span for full supply pressure range 

Port sizes: Main ports: 1/4 NPT/G1/4 female Gauge ports: 1/4 NPT/G1/4 female Captured bleed: 1/8 NPT female I.P. 

Rating: IP65 with piped exhaust


EMC Compatibility: Compliant and CE marked in accordance with the EC Directive 2004/108/EC tested to BS EN 61000-6-2:2005 BS EN 61000-6-4:2007+ A11:2011 Ambient/Media temperature: -10 ... +70°C Air supply must be dry enough to avoid ice formation at temperatures below +2°C.

Maintenance No user serviable parts 

Mounting position: Operation in any orientation is possible; 

integral surface mounting bracket provided. Orientation effect <0.2%

Materials Body: zinc diecasting passivated and epoxy painted Cover: Glass reinforced PA Diaphragms: NBR;


Electrical parameters:

Input Signal :4 ... 20 mA (two wire). Terminal voltage typically < 11 V at 20 mA

Failure Mode Output pressure held at previous value when input signal fails; drift rate  0,2% of span in 5 minutes 

Overload protection 30 mA max. overload current. Unit unaffected by reverse current 

Connections 30mm square connector provided (DIN 43650, form A) mountable in 4 directions 

Span/Zero Independently adjustable up to 15 % output range;


We keep the standard model AC0100 (4-20mA input / 3-15 psi output) in stock.

List of available models (all of the following are suitable replacement units for model starting with "53"):

AC0100, AC0101, AC0111, AC012X, AC037X, AC039X, AC134X, AC138X, AC2100;