Pepperl+Fuchs Isolated Barriers H-System Accessories
2015-11-17 15:38:40
Description:
CA-HWC300-AIO-DIO-10M H-System Custom Cable Honeywell specific system cable for Honeywell Experion Series C GI/IO to Pepperl+Fuchs H-System termination boards, Connects terminal plug on Honeywell Series C GI/IO TA to a single 37-pin Sub-D connector on H-system termination boards, 10 m cable length……
New Products
Orbinox VG SERIES 61 Slurry knife gate valve
Orbinox SERIES 61 (VG) model knife gate valve is a wafer type valve equipped with two metal reinforced rubber sleeves,designed for applications with abrasive slurries.
Crosby J-Series Direct Spring Pressure Relief Valves
J-Series valves provide high quality and dependable overpressure protection for air, gas, steam, vapor, liquid and two-phase applications in one simple design. Now available with two new to the world technologies, Balanced Diaphragm and Bellows Leak Detection.
Vanessa Series 30,000 Cryogenic Triple Offset Valve
The Vanessa Series 30,000 Cryogenic Triple Offset Valve is a virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations.
Sempell Model SOT High pressure steam safety valve
The Sempell Model SOT is a high-pressure steam safety valve designed for boiler protection and steam system safety.
Assortments
Description
H-CJC-Pt100
Resistance Thermometer for Cold Junction Compensation
For Cold Junction Compensation of HiC2081, For HiC Termination Boards, Packaging unit: 8 pieces
HiALC-HiCTB-SET-108
Label Carrier
For HiC Termination Boards, 1 piece for 8-position Termination Board, 2 pieces for 16-position Termination Board
HiALC-HiDTB-SET-150
Label Carrier
For HiD Termination Boards, 1 piece for 8-position Termination Board, 2 pieces for 16-position Termination Board
HiATB01-FAULT-01
Fault Indication Board
1-channel, 24 V DC supply, Monitors up to 16 HiD/HiC Termination Boards, Relay contact output, LEDs for supply and fault status
HiD2000 Blank
Place Holder Barrier
H-System place holder module, Housing width 18 mm, Blank module, non-functional
HiD2900TOP
Terminal Module
2-channel, 24 V DC supply (bus powered), Field circuit protected by fuse
CA-HWC300-AIO-DIO-10M
H-System Custom Cable
Honeywell specific system cable for Honeywell Experion Series C GI/IO to Pepperl+Fuchs H-System termination boards, Connects terminal plug on Honeywell Series C GI/IO TA to a single 37-pin Sub-D connector on H-system termination boards, 10 m cable length
CA-HWC300-AIO-DIO-15M
H-System Custom Cable
Honeywell specific system cable for Honeywell Experion Series C GI/IO to Pepperl+Fuchs H-System termination boards, Connects terminal plug on Honeywell Series C GI/IO TA to a single 37-pin Sub-D connector on H-system termination boards, 15 m cable length
CA-HWC300-AIO-DIO-20M
H-System Custom Cable
Honeywell specific system cable for Honeywell Experion Series C GI/IO to Pepperl+Fuchs H-System termination boards, Connects terminal plug on Honeywell Series C GI/IO TA to a single 37-pin Sub-D connector on H-system termination boards, 20 m cable length
CA-HWC300-AIO-DIO-3M
H-System Custom Cable
Honeywell specific system cable for Honeywell Experion Series C GI/IO to Pepperl+Fuchs H-System termination boards, Connects terminal plug on Honeywell Series C GI/IO TA to a single 37-pin Sub-D connector on H-system termination boards, 3 m cable length
CA-HWC300-AIO-DIO-4M
H-System Custom Cable
Honeywell specific system cable for Honeywell Experion Series C GI/IO to Pepperl+Fuchs H-System termination boards, Connects terminal plug on Honeywell Series C GI/IO TA to a single 37-pin Sub-D connector on H-system termination boards, 4 m cable length
CA-HWC300-AIO-DIO-5M
H-System Custom Cable
Honeywell specific system cable for Honeywell Experion Series C GI/IO to Pepperl+Fuchs H-System termination boards, Connects terminal plug on Honeywell Series C GI/IO TA to a single 37-pin Sub-D connector on H-system termination boards, 5 m cable length
H-CJC-SC-8
Resistance Thermometer for Cold Junction Compensation
For Cold Junction Compensation of HiD2081, HiD2082, For H-System Termination Boards, For terminal blocks with screw terminals, Packaging unit: 8 pieces
H-CJC-SP-8
Resistance Thermometer for Cold Junction Compensation
For Cold Junction Compensation of HiD2081, HiD2082, For H-System Termination Boards, For terminal blocks with spring terminals, For terminal blocks with pluggable screw terminals, Packaging unit: 8 pieces
HiALC-HiCTF-SET-114
Label Carrier
For HiC Termination Boards, 1 piece for 8-position Termination Board, 2 pieces for 16-position Termination Board
HiC2000 Blank
Place Holder Barrier
H-System place holder module, Housing width 12.5 mm, Blank module, non-functional
CA-HW32-F-D37-AIO-DIO-**
H-System Custom Cable
Custom cable for Honeywell Experion Series C I/O to Pepperl+Fuchs H-System, Connects 16-channel terminal plug on Series C IOTA to 16-channel single 37-pin D-sub connector on HiC or HiD, Preconfigured lengths
CA-HW32-F-Y2D37-AIO-DIO-**
H-System Custom Cable
Custom cable for Honeywell C300 system, Connects 16-channel terminal plug on Series C IOTA to 8-channel single 37-pin D-sub connector on HiC or HiD, for single loop integrity applications, Preconfigured lengths
CA-HWC300-AIO-DIO-*M
H-System Custom Cable
Honeywell specific system cable for Honeywell Experion Series C GI/IO to Pepperl+Fuchs H-System termination boards, Connects terminal plug on Honeywell Series C GI/IO TA to a single 37-pin Sub-D connector on H-system termination boards, Preconfigured lengths
CAB-FBM-**-S37S37-**-****
H-System Custom Cable
Foxboro specific system cable for FBM200-Series and 200-Series Compact I/O to Pepperl+Fuchs H-System termination boards, Connects terminal plug on Foxboro baseplates to a single 37-pin Sub-D connector on H-system termination boards, Preconfigured lengths