Natural Gas Compressor with Gas-liquid Mixed Transprocation for Wellhead YB1.25-90
2024-10-15 11:23:51
Description:
The well head pressure decreases slowly from high pressure to about 0.3~2 MPa after long-term mining. The natural gas (containing a small amount of water) from the gas well needs to be pressurized to more than 2 MPa and then treated centrally through the long-distance pipeline to the treatment station.……
YB1.25-90, CNG Compressor for Refueling Station, Hydraulic Piston compressor, Natural gas compressor, Reciprocating piston compressor
New Products
Orbinox VG SERIES 61 Slurry knife gate valve
Orbinox SERIES 61 (VG) model knife gate valve is a wafer type valve equipped with two metal reinforced rubber sleeves,designed for applications with abrasive slurries.
Crosby J-Series Direct Spring Pressure Relief Valves
J-Series valves provide high quality and dependable overpressure protection for air, gas, steam, vapor, liquid and two-phase applications in one simple design. Now available with two new to the world technologies, Balanced Diaphragm and Bellows Leak Detection.
Vanessa Series 30,000 Cryogenic Triple Offset Valve
The Vanessa Series 30,000 Cryogenic Triple Offset Valve is a virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations.
Sempell Model SOT High pressure steam safety valve
The Sempell Model SOT is a high-pressure steam safety valve designed for boiler protection and steam system safety.
Assortments
Description
The well head pressure decreases slowly from high pressure to about 0.3~2 MPa after long-term mining. The natural gas (containing a small amount of water) from the gas well needs to be pressurized to more than 2 MPa and then treated centrally through the long-distance pipeline to the treatment station. High pressure should be injected when the well pressure is too low Days Natural gas increases formation pressure to increase wellhead production.
YB type gas-liquid mixing and pressurization device can reduce the flow pressure of gas well (gas well) by using compressor to increase the recovery rate of gas reservoir and achieve the purpose of tapping potential and increasing efficiency and protecting production and supply.
Compared With The Advantages Of Traditional Compressor Products
Table 1: Comparison of Traditional Pressurization Process and Drainage gas recovery and supercharging device | ||
Traditional Pressurization Process | Drainage gas recovery and supercharging device | |
Component | Heating furnace, pressure reducer, separation tank, compressor, storage tank, trailer, etc | skid mounted mixed booster equipment |
Investment costs | About 2 million | About 1 million |
Construction cycle | One month | 2-3 days |
Energy consumption | Heating furnace energy consumption Regulators waste energy Compressor needs to press high intake pressure distributor | Compressor with minimum inlet pressure distributor |
Failure rate | High failure rate | Hydraulic system, low failure rate |
Compressor leakage | Natural leakage of fillers Compressor shutdown | No leakage Compressor shutdown without emptying |
Parameter Reference
Technical specifications | Type of equipment | ||||||
YB 0.42-74A | YB 1.0-60 | YB 1.2-45 | YB 1.2-66 | YB 2.0-45 | YB 1.25-90 | YB 2.5-270 | |
Structure form | skid mounted, first class compression, compression ratio <5 | ||||||
Air intake pressure (MPa) | 3-13 | 0.3-6 | 0.3-6 | 0.3-6 | 0-4.3 | 0.3-2 | 0.3-4 |
Exhaust pressure (MPa) | 15 | 1-9 | 1-6 | 1-6 | 1-4 | 1-4 | 1-4 |
Exhaust (Nm3/d) | 10000-60000 | 5000-60000 | 5000-40000 | 5000-40000 | 5000-40000 | 10000-30000 | 40000-60000 |
Liquid content in medium | 90% | 90% | 90% | 90% | 90% | 90% | 90% |
Motor power (kW) | 37+37 | 30+30 | 45(electric drive) | 66(fuel drive) | 45 | 45+45 | 90+90+90 |
Total power (KW) | 82 | 72 | 52 | 66 | 52 | 97 | 300 |
Fuel tank (L) | 1500 | 1000 | 400 | 400 | 400 | 1500 | 1500 |
Dimensions (m) | 4.5×2.5×2.75 | 5×2.4×2.75 | 2.8×2.4×2.75 | 6×2.4×2.75 | 4.8×2.4×2.75 | 8×2.4×3 | 9.5×2.9×2.75 |
Customizable products according to customer's on-site requirements | |||||||
Our products are 100% New & Original, in stock, low price promotion.
If you can’t find a suitable product model or require additional information, please contact us: info@hkxytech.com