Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm.
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm.
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HA.
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HA.
ABB CI854BK01 3BSE069449R1 PROFIBUS-DP/V1 interface. PROFIBUS DP is a high speed multipurpose bus protocol (up to 12Mbit/s) for interconnecting field devices, like remote I/O, drives, low voltage electrical equipment, and controllers. PROFIBUS DP can be connected to the AC 800M via the CI854B communication interface. The CI854B includes two PROFIBUS ports to realize line redundancy and it also supports PROFIBUS master redundancy. Master redundancy is supported in PROFIBUS-DP communication by using two CI854B communication interface modules. The master redundancy can be combined with CPU redundancy and CEXbus redundancy (BC810). The modules are mounted on a DIN rail and interface directly with the S800 I/O system, and other I/O systems as well, including all PROFIBUS DP/DP-V1 and FOUNDATION Fieldbus proficient systems. The PROFIBUS DP must be terminated at the two outermost nodes. This is usually done by using connectors with built-in termination. To guarantee a correct working termination the connector has to be plugged and power supplied. Package including: a CI854BK01 Communication Interface and a TP854 Baseplate.
ABB Control System Products » Control & Communication » AC 800M » AC 800M - Communication Modules » CI854B PROFIBUS-DP/V1 Interfaces » CI854BK01 PROFIBUS-DP/V1 interface
Features and benefits
Used for connecting remote I/O and fieldbus instruments via PROFIBUS DP
Possible to connect PROFIBUS PA to the CI854B via the PROFIBUS linking device LD 800P
The CI854B can be set redundant
Communications - AC 800M Communication interfaces
The AC 800M controller family includes a selection of communications modules that make it possible to access a wide range of field devices and third-party systems. The interfaces include:
• Ethernet-based interfaces/protocols
• Serial communications
• Interfaces to ABB equipment
• Communication interfaces to heritage systems
CI853 COMLI and MODBUS RTU
CI854A Classic PROFIBUS DP-V1
CI854B PROFIBUS DP-V1
CI855ABB's MasterBus 300
CI856 ABB's S100 I/O
CI857 ABB's INSUM
CI858 ABB's DriveBus
CI860 FOUNDATION Fieldbus HSE
CI862 Classic ABB's TRIO/Genius I/O
CI865 ABB's Satt I/O
CI867 MODBUS TCP
CI867A MODBUS TCP
CI868 Classic IEC 61850
CI868A IEC 61850
CI869 ABB's Advant Fieldbus 100
CI871 Classic PROFINET IO
CI871A PROFINET IO
CI873 Classic EtherNet IP / DeviceNet
CI873A EtherNet IP / DeviceNet
CI874 OPC UA Client