
ABB valve positioner V18345 Electro-Pneumatic Positioner TZIDC
2015-06-24 16:18:53
Description:
The TZIDC is an electronically configurable positioner with communication capabilities designed for mounting to pneumatic linear or rotary actuators. It features a small and compact design, a modular construction, and an excellent cost-performance ratio. Fully automatic determination of the control parameters and adaptation to the final control element yield considerable time savings and an optimal control behavior.……
New Products
Orbinox VG SERIES 61 Slurry knife gate valve
Orbinox SERIES 61 (VG) model knife gate valve is a wafer type valve equipped with two metal reinforced rubber sleeves,designed for applications with abrasive slurries.
Crosby J-Series Direct Spring Pressure Relief Valves
J-Series valves provide high quality and dependable overpressure protection for air, gas, steam, vapor, liquid and two-phase applications in one simple design. Now available with two new to the world technologies, Balanced Diaphragm and Bellows Leak Detection.
Vanessa Series 30,000 Cryogenic Triple Offset Valve
The Vanessa Series 30,000 Cryogenic Triple Offset Valve is a virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations.
Sempell Model SOT High pressure steam safety valve
The Sempell Model SOT is a high-pressure steam safety valve designed for boiler protection and steam system safety.
Assortments
Description
Quick Details
Standard or Nonstandard: | Standard | Structure: | Ball | Pressure: | High Pressure |
Power: | Pneumatic | Material: | Brass | Temperature of Media: | High Temperature |
Media: | Water | Place of Origin: | Germany | Model Number: | TZIDC |
Brand Name: | ABB |
Packaging & Delivery
Packaging Details: | with standard carton |
Delivery Detail: | 4 weeks |
Specifications
long lifetime control Positioner for model TZIDC V18345 series
HART protocol
Low operating cost
For 4 20 mA two-wire
long lifetime control Positioner for model TZIDC V18345 series
Specifications
1 Input
Setpoint signal (two-wire technology)
Nominal range 4 ... 20 mA
Split range configuration between 20 ... 100 % of the nominal range
Max. 50 mA
Min. 3.6 mA
Starting at 3.8 mA
Load voltage at 20 mA 9.7 V
Impedance at 20 mA 485 Ω
Digital input
Control voltage 0 ... 5 V DC
logical switching state "0"
11 ... 30 V DC
logical switching state "1"
Current max. 4 mA
2. Output
Compressed air output
Range 0 ... 6 bar (0 ... 90 psi)
Air capacity 5.0 kg/h = 3.9 Nm3/h = 2.3 sfcm
at 1.4 bar (20 psi) supply pressure
13 kg/h = 10 Nm3/h = 6.0 sfcm
at 6 bar (90 psi) supply pressure
Output function For single or double-acting
actuators, air is vented from
actuator or actuator is blocked in
case of (electrical) power failure
Shut-off values End position 0 % = 0 ... 45 %
End position 100 % = 55 ... 100 %
Digital output (control circuit to DIN 19234 / NAMUR)
Supply voltage 5 ... 11 V DC
Current > 0.35 mA ... < 1.2 mA Switching state logical "0"
Current > 2.1 mA Switching state logical "1"
Effective direction (configurable) normally logical "0" or logical "1"
3 Travel
Rotation angle
Used range 25 ... 120° (rotary actuators, optional 270°) 25 ... 60 ° (linear actuators)
Travel limit Min. and max. limits, freely configurable between 0 ... 100 % of total travel (min. range > 20 %)
Travel time prolongation Range of 0 ... 200 s, separately for each direction
Dead band time limit Setting range 0 ... 200 s (monitoring parameter for control until the deviation reaches the dead band)