Yokogawa AAI135-S00 Current Input Module and Current I/O Module Isolated Channels
2018-12-27 17:30:00
Description:
AAI135-S00……
New Products
Orbinox VG SERIES 61 Slurry knife gate valve
Orbinox SERIES 61 (VG) model knife gate valve is a wafer type valve equipped with two metal reinforced rubber sleeves,designed for applications with abrasive slurries.
Crosby J-Series Direct Spring Pressure Relief Valves
J-Series valves provide high quality and dependable overpressure protection for air, gas, steam, vapor, liquid and two-phase applications in one simple design. Now available with two new to the world technologies, Balanced Diaphragm and Bellows Leak Detection.
Vanessa Series 30,000 Cryogenic Triple Offset Valve
The Vanessa Series 30,000 Cryogenic Triple Offset Valve is a virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations.
Sempell Model SOT High pressure steam safety valve
The Sempell Model SOT is a high-pressure steam safety valve designed for boiler protection and steam system safety.
Assortments
▶ Pressure Transmitter EJA
▶ Pressure Transmitters EJA-E
▶ Pressue Transmitter EJX
▶ Safety Instrumented System (SIS)
▶ Valve Positioners & Converters
▶ Field Mount Indicators
▶ Temperature Transmitters
▶ Magnetic Flowmeters
▶ Vortex Flowmeter
▶ Ultrasonic Flowmeters
▶ Coriolis Mass Flowmeters - ROTAMASS 3-Series
▶ Variable Area Flowmeters – Rotameters
▶ Device Smart Communicators
▶ PORTABLE AND HANDHELD INSTRUMENTS
▶ Distributed Control System (DCS)
▶ Process Analyzers
▶ Paperless Recorders
▶ Strip Chart Recorders
▶ Data Acquisition Equipment
▶ UT Series Temperature Controllers
▶ UP Series Program Controllers
▶ UM Series Digital Indicators with Alarms
▶ UT100 Series Temperature Controllers
▶ UD Series Manual Setters
▶ Limit Controllers
▶ YS Series Single-loop Controllers
Description
Yokogawa AAI135-S00 Current Input Module and Current I/O Module Isolated Channels
Items | Specifications | |
Model | AAI135 (*1) | |
Number of I/O channels | 8-channel input, isolated channels | |
I/O signal | 4 to 20 mA | |
Allowable input current | 25 mA | |
Withstanding voltage | Between input and system: 500 V AC, for 1 minute Between input channels: 500 V AC, for 1 minute (*2) | |
Input resistance | Power ON | 290 Ω (at 20 mA) to 450 Ω (at 4 mA) (*3) |
Power OFF | 500 kΩ or larger | |
Allowable load resistance | ||
Circuit-open detection | ||
Accuracy | ±16 µA | |
Data update period | 10 ms | |
Transmitter power supply | 15.0 V or higher (at 20 mA) 29.3 V or less (at 0 mA) (*5) | |
Temperature drift | ±16 µA/10 °C | |
Maximum current consumption | 360 mA (5 V DC), 450 mA (24 V DC) | |
Weight | 0.3 kg | |
External connection | Pressure clamp terminal, MIL connector cable, dedicated cable (KS1) | |
HART communication (*6) | Available | |
*1: A Zener barrier is not allowed to be connected with this module. Use an isolation barrier when the module is used in
intrinsically safe applications.
*2: When the ML connector cable is used, the withstanding voltage depends on the electrical specifications of the cable.
*3: The module input resistance viewed from the terminals depends on the current strength as calculated as below:
250 Ω + voltage drop in the input protection circuit/current value
F06E.ai
*5: This voltage is generated between the connecting terminals for 2-wire transmitters for this module. When calculating the
minimum operating voltage for transmitters, consider to allow margins for voltage drop in external wiring.
*6: When this module is installed to a ER bus node unit with HART function, the EB401 firmware must be rev. 2 or later.
Similar model codes for your reference :
AAI135-S00, AAI135-S50, AAI141-H00, AAI141-H53, AAI141-S00, AAI141-S03, AAI141-S50, AAI143-H00, AAI143-H50, AAI143-HE3, AAI143-S50, AAI143-S51, AAI543-H00, AAI543-H03, AAI543-H50, AAI543-H53, AAI543-H60, AAI543-S00, AAI543-S50, AAI841, AAI841-H50, AAI841-S00
If you have any question, please do not hesitate to contact with me online
Contact details :
Shirley Sun
Sales Engineer
HONGKONG XIEYUAN TECH CO., LIMITED
Add : 7-A16, Caishen Commercial Plaza, Hankou Railway Station, Wuhan, China
M : +86-15172506760 (WhatsApp & Wechat) | T : +86-27-85309780 | F : +86-27-85309780
Email : Shirley@whxyauto.com Skype : 169649423@qq.com
Web : www.hkxytech.com