Honeywell SPXCDSERVK XCD Service Kit
2018-03-19 15:48:29
Description:
Honeywell SPXCDSERVK XCD Service Kit, Including O-ring front cover (2 pieces), Terminal module screw (3 pieces), Earth screw and bracket (2 pieces), O-ring weather housing, O-ring cardridge retainer (2 pieces), O-ring on the cartridge (2 pieces), Locking screw for front cover and sensor retainer (2 pieces)……
New Products
FXT1-P37 Right Angle Milling Head
FXT1-P37 Right Angle Milling Head - HKXYTECH
FXT1-P24 Right Angle Milling Head
FXT1-P24 Right Angle Milling Head - HKXYTECH
FXT1-P18 Right Angle Milling Head
FXT1-P18 Right Angle Milling Head - HKXYTECH
FXT1-AC Fully Automatic Right Angle Milling Heads
FXT1-AC Fully Automatic Right Angle Milling Heads - HKXYTECH
Assortments
Description
Honeywell SPXCDSERVK XCD Service Kit
Including O-ring front cover (2 pieces), Terminal module screw (3
pieces), Earth screw and bracket (2 pieces), O-ring weather housing, O-ring cardridge
retainer (2 pieces), O-ring on the cartridge (2 pieces), Locking screw for front cover and
sensor retainer (2 pieces)
Sensepoint XCD
The Sensepoint XCD (exceed) range of fixed gas detectors is used to monitor areas where flammable, oxygen deficiency and toxic gases may pose a hazard to working environments. This advanced and versatile range of gas detectors monitors and indicates the presence of any one of a selection of toxic and flammable gases. Any user can instantly identify the operating status of XCD via its clear multi-function backlit display. Output signals available are industrial standard 4 to 20mA, three relay contacts and MODBUS digital. A magnetic wand allows non intrusive one person calibration, while a wide choice of accesories means XCD can be used in many applications.
Sensepoint XCD with Flammable and Primary Toxic Sensor Cartridge
A Sensepoint XCD KIT consists of Transmitter, Sensor socket, Sensor cartridge, Standard weather protection, Magnetic wand and Allen key.
Sensepoint XCD-RTD transmitter (use with oxygen and toxic Sensepoint sensors)
Sensepoint XCD-RTD (Remote Toxic Detector) allows for a gas sensor from a wider selection of 2-wire 4 to 20 mA input type Toxic and Oxygen sensors to be fitted directly to the transmitter housing, or wired remotely from another location.
KIT includes Transmitter, Magnetic Wand and Allen Key
Sensepoint XCD-RFD transmitter (use with Standard & Hi-Temp Sensepoint sensors)
Sensepoint XCD-RFD (Remote Flammable Detector) allows for remotely mounted flammable gas detectors
such as Hi-Temperature version of Sensepint Flamable to be located in adverse applications and monitored
from a convenient location.
KIT includes Transmitter, Magnetic Wand and Allen Key
| Sensepoint XCD-RTD transmitter (use with oxygen and toxic Sensepoint sensors) |
| Sensepoint XCD-RTD (Remote Toxic Detector) allows for a gas sensor from a wider selection of 2-wire 4 to 20 mA input type Toxic and Oxygen sensors to be fitted directly to the transmitter housing, or wired remotely from another location. KIT includes Transmitter, Magnetic Wand and Allen Key |
| INSTRUMENT |
| Without Modbus |
| SPXCDALMTX4 ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter, 2 x M20 Entries, 1 x M25 Entry, painted LM25 |
| SPXCDASMTX4 ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter, 2 x M20 Entries, 1 x M25 Entry, painted 316SS |
| SPXCDULNTX4 cCSAus approved SP XCD-RTD 4~20mA Input Transmitter, 3 x 3/4'' NPT Entries, painted LM25 |
| SPXCDUSNTX4 cCSAus approved SP XCD-RTD 4~20mA Input Transmitter, 3 x 3/4'' NPT Entries, painted 316SS |
| With Modbus |
| SPXCDALMTX4M ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, painted LM25 |
| SPXCDASMTX4M ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, painted 316SS |
| SPXCDULNTX4M cCSAus approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted LM25 |
| SPXCDUSNTX4M cCSAus approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted 316SS |
| Note: Refer to "Sensepoint" pricelist for the new M25 for ATEX/IECEx and 3/4''NPT for cCSA threaded range of Sensepoint Toxic sensors that may be fitted directly to the 4-20mA input XCD-RTD transmitter. |
| Sensepoint XCD-RFD transmitter (use with Standard & Hi-Temp Sensepoint sensors) |
| Sensepoint XCD-RFD (Remote Flammable Detector) allows for remotely mounted flammable gas detectors such as Hi-Temperature version of Sensepint Flamable to be located in adverse applications and monitored from a convenient location. KIT includes Transmitter, Magnetic Wand and Allen Key |
| INSTRUMENT |
| Without Modbus |
| SPXCDALMRFD ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 2 x M20 Entries,1 x M25 Entry,painted LM25 |
| SPXCDASMRFD ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 2 x M20 Entries,1 x M25 Entry,painted 316SS |
| SPXCDULNRFD cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 3 x 3/4'' NPT Entries, painted LM25 |
| SPXCDUSNRFD cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 3 x 3/4'' NPT Entries, painted 316SS |
| With Modbus |
| SPXCDALMRFDM ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited LM25 |
| SPXCDASMRFDM ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited 316SS |
| SPXCDULNRFDM cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted LM25 |
| SPXCDUSNRFDM cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted 316SS |
| Remote Flammable Sensor (XCD Sensor Cartridge + Socket Housing) |
| SPXCDXSRFXSS Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing |
| SPXCDXSRRXSS Methane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing |
| SPXCDXSRPXSS Propane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing |
| SPXCDXSRB1SS Carbon Dioxide IR 0-2.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing |
| SPXCDXSRB2SS Carbon Dioxide IR 0-5.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing |
| 00780-A-0100 Term Hsg-Bartec DE1155 With Continuity Plate 1x25mm- 3x20mm Entries (ATEX certified) |
| Sensepoint XCD |
| ACCESSORIES, CONSUMABLES & SPARES |
| ACCESSORIES |
| S3KCAL Calibration cap |
| SPXCDCC Collecting cone for use with lighter than air gases |
| SPXCDDMK Duct mounting kit |
| SPXCDMTBR Mounting bracket (inc. bolts, nuts, brackets) |
| SPXCDSDP Sunshade / Deluge Protection |
| SPXCDFH Flow Housing for Sample Panel |
| Consumables |
| SPXCDXSFXSS Flammable CAT 0-100%LEL (20,0 to 100.0%LEL) |
| SPXCDXSRXSS CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL) |
| SPXCDXSPXSS C3H8 (Propane) IR 0-100%LEL (20,0 to 100.0%LEL) |
| SPXCDXSO1SS Oxygen 25.0%/Vol only |
| SPXCDXSHXSS Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm) |
| SPXCDXSCXSS Carbon Monoxide 0-300ppm (100 to 1000ppm) |
| SPXCDXSG1SS Hydrogen 0-1000ppm only |
| SPXCDXSNXSS Nitrogen Dioxide 10-50ppm (10.0 to 50.0ppm) |
| SPXCDXSB1SS Carbon Dioxide IR 0-2%VOL only |
| SPXCDXSB2SS Carbon Dioxide IR 0-5%VOL only |
| Spares (Miscellaneous) |
| SPXCDWP Sensepoint XCD Standard Weather Protection |
| SPXCDSRLS Sensor Retainer with locking screw |
| SPXCDAKS Allen key for stopper |
| SPXCDHWES Hex wrench for earth screw |
| SPXCDEBS Earth Bracket and Screws |
| SPXCDMAG Magnetic wand |
| SPXCDRSSH Sensor Socket Housing for XCD |
| SPXCDMBUS Replacement Modbus Module |
| SPXCDSERVK Service Kit, Including O-ring front cover (2 pieces), Terminal module screw (3 pieces), Earth screw and bracket (2 pieces), O-ring weather housing, O-ring cardridge retainer (2 pieces), O-ring on the cartridge (2 pieces), Locking screw for front cover and sensor retainer (2 pieces) |
| SPXCDTOOLK XCD Service Tool Kit, Including Magnet, Hex wrench for earth screw and Allen key for locking screws |
| SPXCDTMK XCD Terminals Kit, Including Terminal block for relays (green) and Terminal block power |
| SPXCDNPTP 3/4"NPT plug (Certified as part of Ex d enclosure) |
| SPXCDM20P M20 plug (Certified as part of Ex d enclosure) |
| Spares (Replacement Display Module) |
| Each replacement Display Module includes pre-configured PCB (for sensor and range), backlit LCD and plastic housing. The unit is a plug in replacement and simply requires confiiguration after fitting via the menu. |
| SPXCDDMT Replacement display module for O2 & Toxic |
| SPXCDDMF Replacement display module for FL & IR |
| SPXCDDM4 Replacement display module for RTD (4~20mA) |
| SPXCDDMR Replacement display module for RFD |
| SPXCDDMT12 Replacement O2 & Toxic display module Without Modbus for 12-32 Vdc |
| SPXCDDMF12 Replacement FL & IR display module Without Modbus for 12-32 Vdc |
| SPXCDDMTM12 Replacement O2 & Toxic display module with Modbus for 12-32 Vdc |
| SPXCDDMFM12 Replacement FL & IR display module with Modbus for 12-32 Vdc |
| SPXCDDMTM Replacement display module for O2 & Toxic with Modbus |
| SPXCDDMFM Replacement display module for FL & IR with Modbus |
| SPXCDDM4M Replacement display module for RTD with Modbus |
| SPXCDDMRM Replacement display module for RFD with Modbus |
| Spares (Replacement Terminal Module) |
| Each replacement terminal module includes pre-configured PCB (for sensor and range), terminals, screws, 'U' clamp, plastic cover and fixing screws. |
| SPXCDTMO Replacement terminal module for O2 |
| SPXCDTMT Replacement terminal module for Toxic |
| SPXCDTMF Replacement terminal module for FL & IR |
| SPXCDTMO12 Replacement O2 terminal module for 12-32 Vdc |
| SPXCDTMT12 Replacement Toxic terminal module for 12-32 Vdc |
| SPXCDTMF12 Replacement FL & IR terminal module for 12-32 Vdc |
| SPXCDTM4 Replacement terminal module for RTD (4~20mA) |
| SPXCDTMR Replacement terminal module for RFD |
| Spares (ATEX APPROVAL Replacement XCD STD version Transmitter only without MODBUS ) |
| SPXCDALMTXO ATEX/IECEX & AP approved SP XCD O2 Transmitter with LM25, M20 Entry |
| SPXCDALMTXT ATEX/IECEX & AP approved SP XCD Toxic Transmitter with LM25, M20 Entry |
| SPXCDALMTXF ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with LM25, M20 Entry |
| SPXCDASMTXO ATEX/IECEX & AP approved SP XCD O2 Transmitter with SS316, M20 Entry |
| SPXCDASMTXT ATEX/IECEX & AP approved SP XCD Toxic Transmitter with SS316, M20 Entry |
| SPXCDASMTXF ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with SS316, M20 Entry |
| Spares (ATEX APPROVAL Replacement XCD STD version Transmitter only with MODBUS ) |
| SPXCDALMTXOM ATEX/IECEX & AP approved SP XCD O2 Transmitter with LM25, M20 Entry |
| SPXCDALMTXTM ATEX/IECEX & AP approved SP XCD Toxic Transmitter with LM25, M20 Entry |
| SPXCDALMTXFM ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with LM25, M20 Entry |
| SPXCDASMTXOM ATEX/IECEX & AP approved SP XCD O2 Transmitter with SS316, M20 Entry |
| SPXCDASMTXTM ATEX/IECEX & AP approved SP XCD Toxic Transmitter with SS316, M20 Entry |
| SPXCDASMTXFM ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with SS316, M20 Entry |
| Spares (UL APPROVAL Replacement XCD STD version Transmitter only without MODBUS ) |
| SPXCDULNTXO UL approved SP XCD O2 Transmitter with LM25, 3/4"NPT Entry |
| SPXCDULNTXT UL approved SP XCD Toxic Transmitter with LM25, 3/4"NPT Entry |
| SPXCDULNTXF UL approved SP XCD FL/IR Transmitter with LM25, 3/4"NPT Entry |
| SPXCDUSNTXO UL approved SP XCD O2 Transmitter with SS316, 3/4"NPT Entry |
| SPXCDUSNTXT UL approved SP XCD Toxic Transmitter with SS316, 3/4"NPT Entry |
| SPXCDUSNTXF UL approved SP XCD FL/IR Transmitter with SS316, 3/4"NPT Entry |
| Spares (UL APPROVAL Replacement XCD STD version Transmitter only with MODBUS ) |
| SPXCDULNTXOM UL approved SP XCD O2 Transmitter with LM25, 3/4"NPT Entry |
| SPXCDULNTXTM UL approved SP XCD Toxic Transmitter with LM25, 3/4"NPT Entry |
| SPXCDULNTXFM UL approved SP XCD FL/IR Transmitter with LM25, 3/4"NPT Entry |
| SPXCDUSNTXOM UL approved SP XCD O2 Transmitter with SS316, 3/4"NPT Entry |
| SPXCDUSNTXTM UL approved SP XCD Toxic Transmitter with SS316, 3/4"NPT Entry |
| SPXCDUSNTXFM UL approved SP XCD FL/IR Transmitter with SS316, 3/4"NPT Entry |
| Special Flammable Gas Calibrations |
| SPXCDSFGC1 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC2 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC3 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC4 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC5 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC6-H Special Flammable Gas Calibration, 0-100%LEL,6* - Hydrogen |
| SPXCDSFGC7 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC8 Special Flammable Gas Calibration, 0-100%LEL |
| Note: If no Special Flammable Gas Calibration part no. is included on PO, a Methane (6* calibration will be supplied) |