Top Industrial Automation and Electrical Instrument from HKXYTECH
  • Pure Water (Low) Conductivity sensors SC4A/SC42

Pure Water (Low) Conductivity sensors SC4A/SC42

2016-05-27 13:19:19

Description:

The measurement of specific conductivity in aqueous solutions is becoming increasingly important for the determination of impurities in water. The accuracy of the measurement is strongly influenced by temperature variations, polarization effects at the surface of the contacting electrodes, cable capacitances, etc. Yokogawa has designed a full range of precision sensors and instruments to cope with these measurements, even under extreme conditions. These groups of sensors are intended for the low conductivity applications found in the semi-conductor, power, water and pharmaceutical industries, these sensors are in a convenient compact style. There are several mounting possibilities one of which is mounting by a compression gland, giving a simple effective method of direct insertion in process pipework. The sensors are made from a combination of wetted materials approved by FDA. This makes them ideally suited for the monitoring of pure water systems used in the preparation of injectable solutions and the like, for this kind of application, sanitary clamp mountings are used. ……

New Products

Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA

Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm.

Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA

Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm.

Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA

Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HA.

Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA

Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HA.

Assortments

Description

Pure Water (Low) Conductivity sensors SC4A/SC42

The measurement of specific conductivity in aqueous solutions is becoming increasingly important for the determination of impurities in water. The accuracy of the measurement is strongly influenced by temperature variations, polarization effects at the surface of the contacting electrodes, cable capacitances, etc. Yokogawa has designed a full range of precision sensors and instruments to cope with these measurements, even under extreme conditions.

These groups of sensors are intended for the low conductivity applications found in the semi-conductor, power, water and pharmaceutical industries, these sensors are in a convenient compact style. There are several mounting possibilities one of which is mounting by a compression gland, giving a simple effective method of direct insertion in process pipework.

The sensors are made from a combination of wetted materials approved by FDA. This makes them ideally suited for the monitoring of pure water systems used in the preparation of injectable solutions and the like, for this kind of application, sanitary clamp mountings are used.

Model CodeSC4ASC42 Large BoreSC42 Small Bore
Cell Constants0.02/cm; 0.1/cm0.01/cm; 0.1/cm; 1.0/cm0.02/cm; 0.1/cm; 1.0/cm
Ranges0.04-400 µS/cm; 0.2-2,000 µS/cm0.02-2,000 µS/cm; 0.2-20,000 µS/cm; 2.0-200,000 µS/cm0.04-400 µS/cm; 0.4-2,000 µS/cm; 4.0-5,000 µ/cm
Temperature ElementPt1000Pt1000Pt1000
Pressure Rating10 bar/142 PSIG10 bar/142 PSIG7 bar/100 PSIG
Maximum Temperature110°C/230°F150°C/302°F100°C/212°F
Installation Connections3/4" NPT Fitting; 1", 1.5" or 2" Tri-Clamp' RetractableRequires FD40, FS40 or FF40 Holder3/4" NPT Fitting; 1", 1.5" or 2" Tri-Clamp
Integral CableYESNOYES
Materials Of Construction316 Stainless Steel or Titanium316 Stainless Steel316 Stainless Steel or Titanium
Design Style2-Electrode2-Electrode2-Electrode