Top Industrial Automation and Electrical Instrument from HKXYTECH
  • Weidmueller Analogue signal processing

Weidmueller Analogue signal processing

2015-06-29 14:33:25

Description:

When used for industrial monitoring applications, sensors can record ambience conditions. Sensor signals are used within the process to continually track changes to the area being monitored. Both digital and analogue signals can occur. Normally an electrical voltage or current value is produced which corresponds proportionally to the physical variables that are being monitored……

New Products

Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA

Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm.

Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA

Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm.

Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA

Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HA.

Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA

Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HA.

Assortments

Description

Analogue signal processing

When used for industrial monitoring applications, sensors can record ambience conditions. Sensor signals are used within the process to continually track changes to the area being monitored. Both digital and analogue signals can occur. 
Normally an electrical voltage or current value is produced which corresponds proportionally to the physical variables that are being monitored

Analogue signal processing is required when automation processes have to constantly maintain or reach defined conditions. This is particularly significant for process automation applications. Standardised electrical signals are typically used for process engineering. Analogue standardised currents / voltage 0(4)...20 mA/ 0...10 V have established themselves as
physical measurement and control variables.

Weidmüller meets the ever increasing challenges of automation and offers a product portfolio tailored to the requirements of handling sensor signals in analogue signal processing

The analogue signal processing products can be used universally in combination with other Weidmüller products and in combination among each other. Their electrical and mechanical design is such that they require only minimal wiring efforts.

Housing types and wire-connection methods matched to the respective application facilitate the universal use in process and industrial automation applications.

The product line includes the following functions:

  • Isolating transformers,  supply isolators and signal converters for DC standard signals

  • Temperature measuring transducers for resistance thermometers and thermocouples,

  • frequency converters,

  • potentiometer-measuring-transducers,

  • bridge measuring transducers (strain gauges)

  • trip amplifiers and modules for monitoring electrical and non-electrical process variables

  • AD/DA converters

  • displays

  • calibration devices

The products mentioned are available as pure signal converters / isolation transducers, 2-way/3-way isolators, supply isolators,  passive isolators or as trip amplifiers.



Intrinsically safe signal converter for the Ex zone   blob.png

ACT20X is a  product family of signal converters  for the Ex zone. With 11 mm width
per channel  , these compact devices need little space in the cabinet. The signal converters have been specifically developed for process automation  applications in hazardous (Ex) and non-hazardous zones.

The ACT20X series processes all standard input signals (2-wire HART, NAMUR, RTD,
thermocouples, DC signals) from the Ex zone 0  or provides digital and analogue signals, to drive field devices in explosion risk zones. 

Fault and error messages can be forwarded via  the integrated relay outputs. This helps identify errors quickly  and increases system availability.

Using the WI-Manager − the configuration software based on FDT (Field Device Tool) technology −,
the ACT20X devices can be configured individually on the PC for different process
applications. Weidmüller supplies specific  Device Type Managers (DTM),
which can be run in any FDT-based frame.

International  approvals such as IECEx, ATEX, FM and UL permit their use worldwide.