-
Machine tool parts
-
SIEMENS
-
ABB
-
EMERSON
-
SCHNEIDER
-
OMRON
-
PEPPERL+FUCHS
-
MTL
-
ROCKWELL AUTOMATION
-
HIRSCHMANN
-
GE
-
WEIDMULLER
-
WIKA
-
YOKOGAWA
- ▶ Pressure Transmitter EJA
- ▪ EJA110A
- ▪ EJA115
- ▪ EJA118W/EJA118N
- ▪ EJA120A
- ▪ EJA130A
- ▪ EJA210A/EJA220A
- ▪ EJA310A
- ▪ EJA430A
- ▪ EJA438W/EJA438N
- ▪ EJA440A
- ▪ EJA510A/EJA530A
- ▶ Pressue Transmitter EJX
- ▪ EJX110A
- ▪ EJX115A
- ▪ EJX118A
- ▪ EJX120A
- ▪ EJX130A
- ▪ EJX210A
- ▪ EJX310A
- ▪ EJX430A
- ▪ EJX438A
- ▪ EJX440A
- ▪ EJX510A
- ▪ EJX530A
- ▪ EJX610A
- ▪ EJX630A
- ▪ EJX910A
- ▪ EJX930A
- ▶ Magnetic Flowmeters
- ▪ ADMAG AXF Remote Flowtube
- ▪ AXFA14 Converter
- ▪ AXFA11 Converter
- ▪ ADMAG AXF Integral Flowmeter
- ▪ ADMAG AXW Magnetic Flowmeters
- ▪ ADMAG AXR Two-wire Magnetic Flowmeters
- ▪ ADMAG CA Series Capacitance Magnetic Flowmeters
- ▶ Vortex Flowmeter
- ▪ digitalYEWFLO Vortex Flowmeter (DY)
- ▪ digitalYEWFLO Reduced Bore Type Vortex Flowmeter (DY-RB)
- ▪ digitalYEWFLO Multivariable Type Vortex Flowmeter (DY-MV)
- ▪ digitalYEWFLO Vortex Flowmeter High process Temperature Version / Cryogenic Version (DY-HTLT)
- ▪ digitalYEWFLO Fieldbus Type Vortex Flowmeter (DY-FF)
- ▶ Ultrasonic Flowmeters
- ▪ US300PM Ultrasonic Flowmeter (Portable type)
- ▪ US300FM Ultrasonic Flowmeter (fixed type)
- ▶ Variable Area Flowmeters – Rotameters
- ▪ Variable Area Flowmeter-RAMC (Metal Short-stroke Rotameter)
- ▪ Variable Area Flowmeter-RAKD (Small Metal Rotameter)
- ▪ Model RAGN Rotameter
- ▪ Model RAGK/RAGL Rotameter
- ▶ PORTABLE AND HANDHELD INSTRUMENTS
- ▪ HANDY CALIBRATOR CA11E
- ▪ CA700 Pressure Calibrator
- ▪ HANDY TEMPERATURE CALIBRATOR CA12E
- ▪ HANDY MULTIFUNCTION CALIBRATOR CA71
- ▪ Yokogawa CA450 Process Multimeter
- ▪ HANDY CALIBRATOR CA150
-
WATSON SMITH
-
METRIX
-
ASCO
-
ENDRESS+HAUSER
-
BENTLY NEVADA
-
HACH
-
NORGREN
-
HONEYWELL
-
TESTO
-
PHOENIX CONTACT
-
SICK
-
DANFOSS
-
CISCO
-
IFM
-
KROHNE
-
ROSEMOUNT
-
FISHER
-
Natural Gas Compressors
-
Chlorine Analyzers FC400G
The FC400G non-reagent free available chlorine analyzer adopts the polarographic method, using a rotating electrode to continuously measure online the concentration of free available chlorine. The FC400G is a microprocessor-based, intelligent free chlorine analyzer whose development was based on Yokogawa's long expe...
-
Chlorine Analyzers RC400G
The RC400G residual chlorine analyzer employs a polarographic system that uses rotating platinum electrodes to provide continuous online measurement of residual chlorine concentration. By appropriate use of reagents, it is possible to separate residual chlorine (free chlorine + combined-chlorine) from free chlorine for...
-
Dust Monitor DT450G
Air pollution control systems such as bag filters and electrostatic precipitators are used to separate particulate or dust from the gas stream before it is exhausted into the atmosphere. To maintain the dust concentration of the emission gas below the specified level through effective operation of the control system, i...
-
Gas Density/Hydrogen Purity Analyzer GD40 Detector
Low Installation Cost Virtually Maintenance Free Not affected by Dust or Oil Mist
-
Gas Density/Hydrogen Purity Analyzer GD402 Analyzer
Proven Design Many detector features Simple, user-friendly interface Low installation cost
-
Non-Dispersive Infrared Gas Analyzers (NDIR) IR400
The IR400 infrared gas analyzer is capable of measuring the concentrations of NO, SO2, CO2, CO, CH4 and O2 components in sample gas. NO, SO2, CO2, CO and CH4 are measured by the non-dispersive infrared method (NDIR), while O2 is measured by built-in paramagnetic sensor or external zirconia sensor. A maximum of 5 compon...
-
Non-Dispersive Infrared Gas Analyzers (NDIR) IR200
The IR200 infrared gas analyzer is capable of measuring the concentrations of CO2, CO, CH4, SO2, NO and O2 components in sample gas. CO2, CO, CH4, SO2 and NO are measured by the non-dispersive infrared method (NDIR), while O2 is measured by the paramagnetic or zirconia method. A maximum of 4 components including O2 (up...
-
Non-Dispersive Infrared Gas Analyzers (NDIR) IR100
The IR100TA and IR100A, dedicated for analysis of either CO2, CO, or CH4, the IR100TB and the IR100B, dedicated for simultaneous analysis of CO2 and CO, are available. The analyzers are easy to maintain and works steadily over long periods. The ideal application of these analyzers are continuous measurement for the ...
-
Low Concentration (ppm) Zirconia Oxygen Analyzer OX400
This is the latest oxygen analyzer from Yokogawa, and its development was based on the company's long experience and strong track record with this technology. A proprietary new thin-film deposition technology was used in the zirconia sensor that creates a molecular bond between the zirconia element and the platinum ...
-
OX102
The OX102 Oxygen Analyzer measures oxygen concentration from ppm to percent levels in a single analyzer and is ideal for ppm-level measurements in applications such as nitrogen reflow furnaces and semiconductor plants. The zirconia oxygen sensor uses a method that is based on the limiting current principle and is co...