2015-06-29 16:01:58
The digitalYEWFLO Reduced Bore Type Vortex Flowmeter features a cast stainless steel body and a concentric reducer and expander that enable stable flowrate measurements in low-flow conditions. This model reduces installation cost and expands the range of applications available to customers.……
Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm.
Siemens 6DL1193-6TP00-0BH1 SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm.
Siemens 6DL1193-6GC00-0NN0 SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HA.
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HA.
Place of Origin: Japan
Brand Name: Yokogawa
Model Number: Digital YEWFLO
Fluid to be Measured: Liquid, Gas, Steam (Avoid Multiphase Flow and Sticky Fluids)
Ambient Temperature: -29 to 85 deg C (Depends on model type)
Ambient Humidity: 5 to 100% RH (No Condensation)
Minimum measurable flow up to five times lower than conventional vortex flowmeter. Integrated construction with reducers built into the flowmeter body. The digitalYEWFLO Reduced Bore Type Vortex Flowmeter features a cast stainless steel body and a concentric reducer and expander that enable stable flowrate measurements in low-flow conditions. The optimal solution Easy installation Packaging & Delivery
Packaging Details: in carton or according to custom's service Delivery Detail: 2 weeks Specifications
Minimum measurable flow up to five times lower than conventional vortex flowmeter. digitalYEWFLO Reduced Bore Type Vortex Flowmeter
This model reduces installation cost and expands the range of applications available to customers.Features: digitalYEWFLO Reduced Bore Type Vortex Flowmeter
- No longer is it necessary to change the orifice plate to adjust for changes in the flow rate. - Totalization and self-diagnostic functions are available for enhanced flowrate management. <Conventional configuration> - Installation is difficult, involving many different nuts, bolts, and gaskets. - Customer must provide reducers and extension tubes. - There are six connection points, each of which is a potential leak point. 
<The reduced bore digitalYEWFLO solution> - Expanded low flow measurement range - Easy to install - Requires no additional parts - There are only two connection points -- meaning there are fewer locations where leaks can occur. - The same face-to-face dimensions eases the task of installing other sizes or types of digitalYEWFLO flowmeters. While formerly two different types of orifice plates had to be changed to adapt to fluctuations in the line flow rate, this is no longer necessary with the digitalYEWFLO reduced bore type.
In lines that require annual or long-term flow maintenance, the digitalYEWFLO eliminates the need to interrupt the flow to perform this work.
Yokogawa vortex flowmeters are well suited to high temperature and high pressure applications, and the quality of flow management can be improved even further through the use of anti-vibrating efficiency and self diagnostic functions that rely on the digitalYEWFLO's SSP system.Specifications: digitalYEWFLO Reduced Bore Type Vortex Flowmeter
Standard Type Reduced Bore Type Multi-Variable Type Model Model DY
Vortex Flowmeter
(Integral Type,
Remote Type)
Model DYA
Vortex Flow Converter
(Remote Type)
(Option for High
Process Temperature
Version: /HT,
Option for Cryogenic Version: /LT)Option: /R1, /R2
1 size down: /R1
2 size down: /R2
(Option for High
Process Temperature
Version: /HT)Option: /MV Fluid to be Measured Liquid, Gas, Steam (Avoid Multiphase Flow and Sticky Fluids) Nominal Size Wafer 15 to 100 mm N/A 25 to 100 mm Flange 15 to 400 mm R1: 25 to 200 mm
(Detector: 15 to 150 mm)
R2: 40 to 200 mm
(Detector: 15 to 100 mm)25 to 200 mm
(Special: 250 to 400 mm)Accuracy Liquid ±0.75% of Reading
(Depends on Reynolds number)±1.0% of Reading
(Depends on Reynolds number)±0.75% of Reading
(Depends on Reynolds number)Gas
Steam±1.0% of Reading
(Depends on flow velocity)Output Signal Dual Output (Both analog and pulse output available)
Communication: HART 5/HART 7, BRAIN, FOUNDATION™ fieldbusProcess Temperature -29 to 250 deg C
-29 to 450 deg C (/HT)
-196 to 100 deg C (/LT)-29 to 250 deg C
-29 to 450 deg C (/HT)-29 to 250 deg C
-29 to 400 deg C (/HT)Process Pressure -0.1MPa (-1kg/cm2) to flange rating Ambient Temperature -29 to 85 deg C (Depends on model type) Ambient Humidity 5 to 100% RH (No Condensation) Mounting Flange or Wafer Type
JIS 10/20/40K
ANSI 150/300/600/900
(Special: 1500)
DIN PN 10/16/25/40/
60/100/160Flange Type only
JIS 10/20K
ANSI 150/300Flange or Wafer Type
JIS 10/20/40K
ANSI 150/300/600/
900
DIN PN 10/16/25/40Electrical Connection JIS G1/2 Female, ANSI 1/2NPT Female, ISO M20×1.5 Female Explosion Protected Type TIIS Ex d, FM Ex d/Ex ia, ATEX Ex d/Ex ia,
CSA Ex d/Ex ia, IECEx Ex d, SAA Ex iaMaterial Body: Stainless steel(Special: Hastelloy, Carbon steel)
Shedder Bar: Duplex stainless steel(Option: Stainless steel, Hastelloy)
Gasket: Stainless steel with Teflon coating (/HT: with Silver plating)
Converter
